Rock Splitting Wedges, Heavy Stone Wedges, Iron Chisel and Rock Separation Tools

Slipped in the wedge and feathers and tapped the wedges a few times and the rock was split. You don't have to hit them hard, just tap Easily deal with all kinds of stone
Stone splitting is fast, simple, efficient and reusable
Time-saving, labor-saving, convenient and convenient
Compared with the traditional method, the stone splitter is more convenient to operate

This product can be used repeatedly, if you have a heavy workload, please purchase and stock as appropriate
Introduction to the principle of stone splitter
(2) Working principle
Place the stone splitter in the borehole for external use
The hammer applies a certain horizontal direction to the middle wedge
Static pressure to produce a larger level
Split the force to achieve the purpose of splitting the stone
(3 Uses and features
It can be used for the splitting of rocks in the home garden and the static demolition of urban buildings, etc.
Can eliminate flying rocks, vibration and noise
Low cost, cost saving, fast stone splitting
Convenient and efficient
Easily solve hard rocks
Three easy steps to solve hard rocks
Convenient and efficient
The comprehensive performance of spring steel forging is stronger
Forged with spring steel, high-strength hexagonal bar design
High hardness and more durable
Stone splitting is faster and more efficient
Splitting stones faster than traditional methods
At the same time, it reduces waste, saves costs, and is environmentally friendly and pollution-free
Applicable scene
Home decoration/rock demolition/pavement demolition/slope treatment
Stone Splitting Knowledge
The diameter of the hole needs to be 2mm larger than the diameter of the stone splitter
Generally, the hole distance of the opening is 10cm, and the actual number of use is determined by the workload
Comprehensive performance is better and more durable
*Heavy rock splitting wedge is used to split large and hard stones, rocks, granite, marble and concrete. Place a rock splitting wedge 6-10 inches apart on the rock that needs to be blasted to work. You can increase or decrease the number according to the size of the rock. It can explode rocks up to 78 inches in diameter
*The rock crusher is a tool that uses non-blasting methods to break rocks and can be completely replaced Ideal and efficient tool for secondary blasting and chemical separation, environmentally friendly
*High-quality spring steel forgings are durable, high-hardness steel, heat treatment process, high hardness and good toughness. The material is harder and more durable; the surface of the stone splitter is frosted, non-slip and wear-resistant, and the stone splitting speed is faster; the specially enlarged nail cap has strong load-bearing capacity and is not easy to slip off
*The diameter of the borehole needs to be 2mm larger than the diameter of the rock splitter. A hole with a diameter of 1.02 inches/26 mm and a depth of 7.5 inches/190 mm must be pre-drilled for the rock drill to enter.
*Note: It can not be used in a place with a large slope, so as to avoid the danger of falling when the rocks are separated. Moreover, necessary protective measures must be taken when working; when the stone is about to burst, keep a distance and be vigilant.