UTV 30" Rear Chase LED Light Bar For Kawasaki Teryx Can Am Commander Arctic Cat
30"Inch Chasing LED Light Bar
Technical Specification:
1. 30" Rear Chase LED light bar with strobe lights
2. 30 LED(Color-RGYGR ) including 6 LED - 6 LED - 6 LED - 6 LED -6 LED
3. High intensity LED chip 50,000+ Hours life expectancy
4. Brake Light: this brake lights are wired independently, 2 blocks of 6 LEDs each
5.Turn Signal Light: this Turn Signal lights are wired independently, 2 blocks of 6 LEDs each
6.Reverse Light: this Reverse lights are wired independently, 1 block of 6 LEDs each
7.Strobe Light: strobe lights with independent wiring and flashing patterns that can be controlled by the on/off switch
8. it's a must for All enthusiasts looking for extra safety.
Specification:
Type: 30Inch Rear Front Chase LED Light bar
Light Length: 30 inch
Bulb Type: LED
Color: Multi-color
Input Voltage: DC 9-30V
LED QTY: 30/pcs
Luminous Flux: 30000LM
Beam: 121° Flood Beam
Waterproof Rating: IP68
Lifespan: up to 50000 hours
Material: Die-cast Aluminum Housing, Toughed Glass Cover, aluminum substrate circuit board ,led chips,
Appearance: Black, Square Shape
Working Temperature: -60 to 85℃
Dimension:31.8*5*1.6inch (Approx)
Weight:1.7KG / 3.74LB
Apply to car: front, rear, Rear Facing, Front Facing,
Accessories: mounting hardware set + wire harness with in-line dual switch + 3Pin extension cable + multifunction wire
Certification:CE, RoHs, FCC
Product Feature: Street-sport-motorcycles , Easy to install and use, Includes all necessary hardware needed, Durable and long lasting
Feature:
1. Strobe Lights have 8 Different Patterns
2. Independently Control Brake Light, Reverse Light, and Strobe Patterns, turn strobe off by holding
3. the strobe pattern switch for 3 seconds
4. Brighter and more effective than standard LED strobe lights
5. Die-cast aluminum housing for maximum heat dissipation
6. IP68 Water resistant
7. Hard coated flood optic polycarbonate lens
8. Independently control turn signal light, brake / running light, reverse light and 8 strobe patterns
9. Two types of wire harnesses with Power on/off switch (strobe controller) are included
10. Angle adjustable side ends mount brackets included
Strobe Instructions:
Wire Connection:
1) 4-Colors Wire Harness:
Red line to brake, white line to reverse, black line & blue line to turn signal;
2) Wire Harness with in-line dual switch:
Black line to negative, red line to positive.
Light Function:
3) Instruction for In-line dual switch:
• Press the “-”/“o" to turn ON/OFF.Function momentary.
• Press the “·” for 3 seconds to change the strobe light patterns.
• strobe patterns include 1 solid, 8 flash strobe lights.
Package Include:
1x 30"Inch Chasing Light Bar
1x wire harness with in-line dual switch
1x 3Pin extension cable
1x multifunction wire
1x Mounting Brackets&screws
1x Instruction
