Description:
- The amplifier can uses RA,M Toshiba SU series module and the panel has auto transceiver circuit
- The module power voltage has an effect on the transmitting power.Within the working voltage,the lower the voltage,the lower the transmitting power.
- The antenna affects the communication distance and please select the right antenna.
- RF power amplifier board:The PCB panel is peripheral circuit for power module.It can work normally with RA,M series,Toshiba SU series module.It is for 1-5W handheld walkie-talkie.Auto ransceiver circuit,increasing the transmitting power. 
1:LED indicator light(green);transmissing LED indicator light(red)
2:1-5W power input(external screw inner hole SMA)
3:DC-12-13.8V power supply interface
4:Module the second pin (VGG) voltage & power adjusting,clockwise knobing,the voltage increases;Anti-clockwise knobing,the voltage decreases.
5:Power output interface(the upper negative,lower positive)
Specification:
-
- Input power:1-5W
- Transmitting frequency:depends on the module mode
- Output power:depends on the install module mode
- Power supply:DC 10-13.8V
- Standby current:10-20mA
- Output power:20W( with 20W M57704H Module ）
- Working frequency:410-470
- Insertion loss:-1.5DB
- Standing Wave Ratio:<=1.5
- The mininimum size:94x50x1.6mm package include ： RF Power Amplifier Board Transceiver Circuit PCB board with 20W M57704H Module 
- The amplifier can uses RA,M Toshiba SU series module and the panel has auto transceiver circuit
- The module power voltage has an effect on the transmitting power.Within the working voltage,the lower the voltage,the lower the transmitting power.
- The antenna affects the communication distance and please select the right antenna.
- RF power amplifier board:The PCB panel is peripheral circuit for power module.It can work normally with RA,M series,Toshiba SU series module.It is for 1-5W handheld walkie-talkie.Auto ransceiver circuit,increasing the transmitting power.
3:DC-12-13.8V power supply interface
4:Module the second pin (VGG) voltage & power adjusting,clockwise knobing,the voltage increases;Anti-clockwise knobing,the voltage decreases.
5:Power output interface(the upper negative,lower positive)
Specification:
-
- Input power:1-5W
- Transmitting frequency:depends on the module mode
- Output power:depends on the install module mode
- Power supply:DC 10-13.8V
- Standby current:10-20mA
- Output power:20W( with 20W M57704H Module ）
- Working frequency:410-470
- Insertion loss:-1.5DB
- Standing Wave Ratio:<=1.5
- The mininimum size:94x50x1.6mm
Payment
We accept PayPal only.
We only ship item to your PayPal verified address.
Payment must be received within 3 days from the date of purchase.
Orders will be processed and dispatched within 3 days normally
Terms Of Sales
1. Our listing price includes the value of goods,packaging cost,and export
taxes,not including international import duties.
2. Import duties,taxes,and charges are not included in the item price or shipping fee.
3. The import duties are buyers' responsibility.Please check with your country's
customs office determine what these additional costs will be prior to your
purchase.
4. All disputes arising from the import duties will be submitted to eBay for solution.
Feedback
Any
questions, pls. contact us via ebay message or email us.We will reply
your message within 48 hours. If you do not receive our reply within 48
hours, pls. post a message again because sometimes our message system
may block some emails.
Our aim is to provide
Top Level Customer Service, your recognition will encourage us greatly
and serve you better. We strive to keep all our customers satisfy.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.Thanks!
Contact Us
We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders.