BX88230 Bolt-On Base Plate Bracket Kit
Fit for Blue Ox Tow Bars General Purpose Adapter Kit
5000 lbs 25 Packs Universal kit
For Jeep, Ford, Toyota, Honda, Buick, Volvo
【Compatibility】
BX88230 General Purpose Adapter Kit helps to connect any base plate to Blue Ox tow bars with cross angle. Allows certain vehicles to build own base plate. Replace OEM BX88230. Work for various vehicles, such as Jeep, Ford, Toyota etc.
【Notice】
Most vehicle bumpers are not suitable for towing when it is no modification and reinforcement. These brackets can't be installed on rubber or plastic. The mounting brackets should be attached to a flat metal surface.
【Features】
Tow bars for flat towing. Setup works great off-road and when towing. Rated towing capacity of 5000 lbs is developed to provide steady performance and reliability
【Easy Installation 】
Bolt-on type, Drilling four 17/32"holes in the bumper is required. Includes Mounting Hardware. Requires no modification.
【Material】
Made of quality heavy-duty steel, high strength, corrosion resistance, rust and wear resistance, strong and durable. Sturdy machined and welded steel structure ensure life-long to use.
Wide Application:
- Our Universal Adapter Kit adapts any base plate for Blue Ox tow bar with cross angle.
- Suitable for most models, such as for Ford, for Toyota, for Honda, for Buick, for Volvo, for Jeep Wrangler JL JK CJ TJ YJ XJ, Willys, for Scrambler, and so on.
Note:
- The installation of this baseplate requires drilling four 17/32” holes in the bumper.
- Most vehicle bumpers are NOT suitable for towing without modification and reinforcement. These brackets should never be attached over rubber or plastic. The mounting brackets should be attached metal to metal and to a flat surface. The bumper and the bumper bracket may need to be reinforced.
Upgrade Design:
- By bolting these heavy duty brackets to your bumper, which creates your own base plate to mount for Blue Ox tow bar.
- Most bumpers require reinforcement or modification.
- The bracket must be mounted on a flat metal surface.
- Designed to provide stable performance and reliability.
- Comes with installation instructions, saving you time and effort.
Installation Instructions:
- Locate the center of your bumper and measure out 10 9/16” to either side. From the center of that mark measure over 21 1/8” to the opposite side. Drill 17/32” holes at these marked points.
- The tabs are not welded in the center of the baseplate, be certain that the tabs are off set to the center of the bumper. Attach the baseplate to the bumper using the inside bracket holes and the bumper holes drilled in Step 1.
- Mark 17/32” holes in the bumper for the outer bracket holes, using the bracket as a template.
- Remove the brackets and drill 17/32” holes in the bumper at the points marked.
- Install the brackets using all the holes and hardware.
- Install the tow bar and safety cables according to the instructions included in their packages.
- Do not substitute other devices if the pin and clip are lost.
