Renogy Boost 10A 36V/48V Auto DC Input MPPT Solar Charge Controller Regulator

Slide Slide Slide Slide Slide Slide Slide Slide
$99.99
Current Output
10A
Protection Level
IP20
Nominal System Voltage
36V / 48V, Auto Recognition (Non-Lithium)
Battery Operating Range
30 ~ 65 VDC
System Configuration
Off-Grid
Power Source
Solar
Max Input Current (short-circuit, Isc)
35A
Ground Type
Common Negative Lug (M3)
Dimensions
8.8 x 7.6 x 2.9 inch / 224 x 192 x 74.5mm
MPN
RCC10RVRB-US
Battery Types
AGM/Sealed, GEL, FLOODED, LFP, USER*
Weight
2.65 lbs / 1.2 Kg
Brand
Renogy
Max. PV Input Power
PV Input Power: 500W/36V; 650W/48V；Charging Power: 450W/36V; 600W
Type
Solar Charge Controller
Power Limiting Protection
Up to 600W/36V; 800W/48V
Solar Input Voltage Range (VOC)
15 ~ 25VDC / 36V；15 ~ 40VDC / 48V
Model
MPPT
MPPT Voltage Range
15 ~ 25VDC / 36V；15 ~ 40VDC / 48V
Rated Charge Current
10A
Charging Mode
MPPT (Maximum Power Point Tracking)
Power Consumption
≤ 2W
Application
Back-up Power, Camping/Hiking, Electronics, Home/Garden, Recreational Vehicle (RV), Shed
condition
New
banner

A Reliable Optimization System That Is Worth Using with Trust.

High Efficiency: The all-new Rover Boost controller is a 10Amp Maximum Power Point Tracking (MPPT) charge controller engineered to charge a 36V or 48V battery bank from voltage typically found in only 1-2, 36-cell solar modules.

Multi Compatibility: Featuring 4-stage battery charging (Bulk, Boost, Float, and Equalization), the Rover Boost is pre-set to be compatible with AGM, Gel, Flooded, and Lithium batteries, and even includes custom battery settings.

Multiple Protection: The Rover Boost is packed with numerous battery banks, controllers, and solar electronic protections for peace of mind and an optimized system you can trust.

controller

Renogy Rover Boost-36V/48V MPPT Solar Charge Controller

The 10A Rover Boost charge controller is a unique solution that allows you to charge 36V or 48V battery banks with 12V or 24V low voltage solar panels—specially designed for golf carts and electric vehicles. Increase your driving mile range and battery life using the power of solar and the Rover Boost.

  • Item Weight: 2.65 Pounds
  • Item Dimensions LxWxH: 8.8 x 7.6 x 2.9 inches
  • Battery Types: AGM, GEL, FLOODED, LFP, USER

Specifications

  • Rated System Volt: 36V / 48V
  • Rated Charge Current: 10A
  • Max Input Current (short-circuit, lsc): 35A
  • PV Input Power: 500W/36V; 650W/48V
  • Charging Power: 450W/36V; 600W/48V

01

02

03

99% MPPT Charging Efficiency

Advanced MPPT Technology with minimum 99% tracking efficiency and 90% charge conversion efficiency for 4-stage battery charging (Bulk, Boost, Float, and Equalization) with charging.

36V/48V Automatic System Recognition of Lead Acid Batteries

4-preset battery charge profiles for AGM/Sealed, Gel, Flooded, and Lithium. User mode allows you to customize charging parameters for a wide variety of applications.

*Please note that automatic system recognition does not apply to lithium batteries.

Bluetooth Monitoring

Add a Renogy Bluetooth Module (sold separately) and download the Renogy DC Home App for remote monitoring and customization.

04

05

06

Optional: Renogy BT-2 Bluetooth Module

  • Port Type: RJ12 Communication
  • Protocol: RS485 Signal range up to 82ft
  • Two LED lights
  • Remote Monitoring: Use with Renogy DC Home APP

Optional: Remote Temperature Sensor

  • Accurate temperature data
  • 9.8ft cable length
  • NOTE: Do not use this sensor with Lithium batteries

Optional: Renogy Voltage Sensor

  • More accurate battery voltage
  • Adjust the charging stage more precisely
  • Extend battery life

01

Two modes introduction

48V 100Ah Wiring

  • Assuming each battery is a 12V 100Ah battery bank, you will combine 4 x 12V batteries in series to achieve a 48V 100Ah battery bank. In series connections, the 12V voltages add up to 48V, while the 100Ah Rating remains the same.

Wiring Tips for 3 X 12V100Ah Battery System

  • Assuming each battery is a 12V 100Ah battery bank, you will combine 3 x 12V batteries in series to achieve a 36V 100Ah battery bank. In series connections, the 12V voltages add up to 36V, while the 100Ah Rating remains the same.

NOTE: The M3 screws have a recommended torque of 0.5~0.8 N-m / 0.4~0.6 lb. ft.

The M6 screws have a recommended torque of 4.1~5.0 N-m1 / 3~3.7 lb. ft.