
What Can You Do with an Airbrush?
An air brush is an air-operated tool that sprays various media. You can use the air brushes to create a wide variety of artistic works on nails, models, cake, food, T-shirts, canvas and a multitude of other surfaces. They work in watercolor and other paints, in dyes and inks and even in makeup foundation.


What's in the box?
- 1 x Blackgold Airbrush
- 1 x USB Cable
- 1 x Instruction
- 1 x 5ML Pipette
- 1 x 10ML Pipette
- 1 x 20ML Pipette
- 1 x User Manual
- 1 x Extendable Hose
How to spray
- Install the gun on the air pump.
- Fill fluid in the cup after thinning appropriately.
- Short press the ON/OFF switch on the compressor. The airbrush will get air fluid at this time.
- Align the area to be sprayed, the distance is 2-3cm, move the trigger backwards slightly, spray he atomized paint,then move the airbrush back and forth.
- Note: The package doesn't include the adapter. It is recommended to use a 5V/1A or 5V/2A adapter, please don't use the adapter exceed 5V 2A. And the fast charging interface cannot be used.

Easy to use
- For nails art
Safety product
- For makeup
Widely used
- For art work


Cleaning & Maintenance Methods:
- Add water, alcohol or cleaning fluid to the fluid cup and spray it.
- Try back flushing. Cover the nozzle with finger or a paper towel and press down slightly on the trigger. This helps clean the narrow chamber around the needle.
Please Note:
- Please test the airbrush with water before use to make sure the airbrush is not clogged.
- When finishing the spraying work or have to stop for more than 10 minutes, please clean the airbrush cavity, nozzle, and fluid cup thoroughly in time.
- After 30 minutes of continuous use, the air compressor should be turned off for a few minutes to cool down.
- Please Don't soak your airbrush. Even though it might sound like a simple cleaning solution, doing so will actually damage the more sensitive parts of the tool.
- Please use water-based makeup foundations instead of oil-based makeup foundations, you need to use makeup foundations made for airbrushes otherwise it will clog the nozzle.
- Please do not use the airbrush when charging.
- If the trigger starts to feel sticky, use one of the special lubricants that are specifically designed for airbrushes.
- If the airbrush can't spray liquid, it may be because the fluid control knob is too tight or the nozzle is blocked. Please try to adjust thee fluid control knob or clean the nozzle with alcohol or detergent.


On Jan 15, 2025 at 20:38:33 PST, seller added the following information: