Reborn Elevate Wakeboard Tower Polished
Measurements
up to 86" between the front deck mounts
up to 102'' between the rear deck mounts
Materials
Seamless 2.25inch, 6063 Aircraft Aluminium tubing.
CNC Machined solid 6061 Aluminium Fittings.
Stainless Steel Hardware.
Lowering the Wakeboard Tower.
The wakeboard tower was designed with low storage in mind.
Front legs detached from the fittings.
Rear legs pivot backwards to lower the top section.
Top section hinge lowers the front legs flat.
Easy job no more than 2hours.
Reborn wakeboard tower bimini is designed to fit most popular Wakeboard Towers on market.
It is fully adjustable it can slide forwards or backwards for minor adjustments.
The support arms can be at the front, rear, above or below for the right attachment required for your tower.
The main cross bar is pin adjustable and will lock in strong between your wake tower legs.
When towing your boat simply remove the cover via zippers and velcro, the frame is left in position.
How to choose the correct size?
Measure across the boat between the front legs and between the rear legs across the boat at the height you would like you bimini to sit.
If your measurement is between 53in-62in, you will need size 1350V
1.35m (W) x 1.9m(L) or 53in(W) x 75in (L)
If your measurement is between 63ïn-82in, you will need size 1580V
1.58m(W) x 1.9m(L) or 62in(W) x 75in(L)
Note: This package can only fit boat up to 95in, if your boat is above 95in, your measurement will perhaps exceed 82in, then you will be required to choose our PRO2 tower bimini.
Clamps 2.5 inch, 2.25 inch and 2 inch tower leg outside diameters.
Available canopy color: jet black and captain navy blue.
This list is for black.