⦁Silent, Smooth
Operation, Easy Install, Fits Most Bikes Normal and Fat Bikes
⦁Robust Design, Fits
over Gear Cable, 2 Lower Attachments
⦁1 Year Warranty
Manufactured by 3D Printer, Made in the U.S.A.
⦁What you get: 1 Chain Guide with 2 lower attachments, 2 Zipties ⦁Weight: 1.2 oz with zipties - Dimensions: 2.3
inches wide x 2 inches height, 1.2 inches thick.
Dont have to take Chain off simply open the lower half and put around chain.
Don't Forget to Sign Up for your 1 Year Warranty.
How to Install
Make sure the flat side faces to the front of the bike.Pictured
Peel of the Red backing, Slip the Upper Housing under the break
cable so its against the frame and the cable is inside the housing like in the
pictures.
Ziptie to the frame, Screw on the lower chain guide and your
done. Re-Install your Chain and your ready to go.
Comes with a 12 month warranty on Upper Housing.
Introducing Quintessentialz Mountain Bike Chain Guide.
This Chain Guide works silently, so no more chain noise while
your peddling.
It'll be nice a quite on your ride, so you can enjoy sounds of
nature and the shredding of dirt, while keeping that chain on its chainring
where it belongs.
Easily installed with the 3 included zipties. The zinc screw
makes sure you don't have worry about rust and pre-installed loctite makes sure
the bolt doesn't come off.
We made this a 2 part design, making switching the Lower Chain
Guide attachment easy to switch out to a new one in under a minute with a screw
driver, while keeping the main housing attached to the frame.
Every Quintessentialz Bike Chain Guide comes with 2 lower chain
guide attachments to make sure you have a spare when you need one.
Each lower chain guide should last you hundreds of miles of use.
If you need further replacements the lower chain guide attachment are sold here
on amazon.
The Guide is manufactured by 3D printers, visible layer lines
will be seen in the exterior of the product. Though made by 3D printer the
chain guide is very strong and durable and all tests have been done with 3D
printed models
This chain guide is a custom design by Quintessentialz(TM) and
all copy rights apply.
Designed and Made in the U.S.A.
We designed it to preform better than the competition and making
sure it is over built to withstand the rigors of mountain biking.
Fits normal and fat bikes.