Pump Seal Repair Kit for Hayward Power-Flo LX SP1580 Series Pumps

Slide Slide Slide Slide Slide Slide Slide
$18.9
Manufacturer Warranty
1 Year
Type
Pump Seal Repair Kit
Brand
Unbranded
condition
New

Replace for Hayward SP1580 Pump Seal Kit O-Ring Seal Gasket Rebuild Repair Kit Complete Pump Rebuild Repair Kit Fit for Hayward Power-Flo LX, SP1580 Series Pumps

 
 
  • 【Wide Application】This Complete O-Ring Rebuild Repair Kit is compatible with All Hayward Power-Flo LX, SP1580 Series Pumps. Fit for the following models: SP1580, SP1580H, SP1580TL, SP1580X15, SP1580X15TL, W3SP1580, W3SP1580X15. Parts also for Models: SP1575LX, SP1520UN, EP1500LX, and SP1680 Series.
  • 【Great Features】Perfectly replace Hayward Power-Flo LX SP1580 Series Shaft Seal O-ring Gasket Repair Kit. This pump rebuild kit is easy and convenient to service and repair your pool or spa pump. It can return your pool system back to peak performance and efficiency, eliminate leaks, and prolong the life of the pump. No need to replace the whole pump, which is an economical solution.
  • 【Superior Material】This Complete Pump Rebuild Repair Kit is made of high-quality steel, rubber, plastic, ceramic and graphite. With strong durability, corrosion resistance, and anti-rust performance. Better quality allows it to be used for a longer time.
  • 【Package Includes】There are (1) Strainer O-Ring; (1) Housing O-Ring; (1) Drain Plug O-Ring; (2) Union O-Rings; (1) Seal Assembly. You will also receive an O-Ring Lube.
  • 【100% Satisfaction Guarantee】We are committed to providing excellent products and the best service for our customers. If you are not satisfied with the product, you can simply return it. We support a 30-day refund on return and a 12-month warranty.
 
 

Product Description

01
02

O-Ring Seal Gasket Rebuild Repair Kit Complete Pump Rebuild Repair Kit

 

  • This Complete O-Ring Rebuild Repair Kit is compatible with All Hayward Power-Flo LX, SP1580 Series Pumps.
  • Fit for the following models: SP1580, SP1580H, SP1580TL, SP1580X15, SP1580X15TL, W3SP1580, W3SP1580X15.
  • Parts also for Models: SP1575LX, SP1520UN, EP1500LX and SP1680 Series.

 

 
06

SHAFT SEAL CHANGE INSTRUCTIONS

 

  • IMPORTANT: Exercise extreme care in handling both the rotating and the stationary sections of the two-part replacement seal. Foreign matter or improper handling will easily scratch the graphite and ceramic sealing surfaces.

 

 

  1. Shut off water flow to pump by closing appropriate valves or by plugging both the skimmer outlet port and return port to pool. Disconnect piping or hoses from the motor/pump assembly.
  2. Remove the strainer by disengaging and removing the strainer cover. Remove the basket. Lift up on strainer C-clip and remove. Finally, slide strainer housing forward and remove.
  3. Unscrew eight (8) screws and remove pump cover, exposing the impeller.
  4. Remove the canopy or the shaft cover plate from the end of motor opposite the impeller.
  5. Hold the motor shaft securely by either inserting a screwdriver in slot at end of shaft or by using an open-end wrench to engage the flat surfaces provided near end of motor shaft. Rotate the impeller in a counterclockwise direction and remove it from the motor shaft.
  6. Note how the steel spring section of the old seal is positioned on impeller hub and remove it by pulling from the impeller.
  7. Loosen four (4) motor through bolts from the back of motor and remove pump housing/shroud from the front of the motor.
  8. Remove the ceramic stationary portion of the old seal by pressing the white ceramic seat out of the pump housing recess. If assembly is tight, tap lightly from the “motor” side.
  9. Clean and lubricate the impeller stem and the pump housing recess with a dilute solution of non-granulated liquid type soap. Do not use petroleum or silicone lubricants as these can contribute to seal leakage.
  10. Press the new rotating portion of the seal assembly onto the impeller stem with the polished black graphite surface facing away from the impeller.
  11. Carefully press the stationary ceramic portion of the seal into the recess of the pump housing/shroud, with the polished flat surface facing out.
  12. Carefully insert the motor shaft through the pump housing/shroud and align with white ceramic stationary seal assembly in place and secure the motor to pump housing/shroud with four (4) motor through bolts removed in step 7. Be sure motor base and pump discharge port are positioned properly. Alternately tighten the motor through bolts until the pump housing is secure. Make certain motor shaft turns freely before proceeding.
  13. Screw the impeller (clockwise) with the rotating portion of seal in place onto the motor shaft. Hand-tighten the impeller in place.
  14. Discard all old O-rings and use new O-rings for assembly.
  15. Assemble the pump cover to the pump housing/shroud with the eight (8) screws removed in step 3. Tighten screws alternately and evenly.
  16. Re-assemble strainer by sliding strainer housing onto pump cover. Install strainer C-clip by pushing clip down onto grooved pump cover coupling. Insert basket and fasten strainer cover.
  17. Reconnect pump to the piping or hoses provided. Open all valves and make sure that the pump strainer housing is full of water before restarting the pump.

 

03

04

05

CONTACT US:

If you meet any problem after receiving our product, please feel free to contact us. We will try our best to solve your problem.

SHIPPING POLICY:

Orders will be ship out within 1-2 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. Please allow 10-30 days for international deliveries. Some shipments could take longer subject to your local customs authorities.

RETURE & WARRANTY:

1  We accept 30 days return guarantee for all Items If you are unsatisfied with something you bought from us, you may send it back within 30 days of receipt, and we shall be happy to exchange or refund.
 
2  Leave a message note in returned box quoting your item(s) ID and buyer ID.
 
3  All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns.
 
4  It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.
 
5  Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return.

ABOUT REPLY:

If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.

ABOUT FEEDBACK:

Please contact us before leaving Netural or Negative feedback if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.

If you are satisfied with our service, please kindly leave us a 5-star feedback. Thanks💖!

 

PushAuction