Proxel - Front + Rear With Wireless Display Electromagnetic Parking Sensor

Produced in Italy

The guarantee and the quality of the Made in Italy

Directly from the manufacturer

Designed and produced in Italy. We have been providing reliability since 1993.

Without changing the aesthetics of the car

Thanks to the installation of the sensor inside the bumper, it does not affect the line of the bumper.

Proxel invisible electromagnetic parking sensors Front + Rear with Wireless Display

The rear and front electromagnetic parking sensors are completely invisible and do not change the aesthetics of your car.

For the rear version, the approaching of the obstacle is signaled with a sequential increase of "BEEPs" which become increasingly frequent as the vehicle approaches the obstacle. For the earlier version, approaching an obstacle is always signaled with three different sounds: pre-alarm, alert and risk of contact.

The electronic control unit for the rear version is located inside the luggage compartment near the rear light unit, while for the front version it is located inside the passenger compartment under the dashboard.

Details EPS-DUAL 4.0 with Wireless Display (rear)

Details EPS-FRONT 4.0 (front)

Main features EPS DUAL 4.0 with Wireless Display (rear)

Wireless display (rear)

Multicolor led bar display

Built-in buzzer

Wireless

Alimentation cable: 2.0 meters

TO: 10cm

B: 2cm

Depth: 1.5cm

Color: black

Incompatible vehicles (rear)

The following vehicles are NOT compatible with the EPS-DUAL 4.0 Parking Sensor with Wireless Display:

Mazda Pickups | Mitsubishi L200 | Nissan Patrol (with metal bumper) | Nissan Pathfinder (version with spare wheel on tailgate) | Nissan Navara | Toyota Rav 4 (before 2006) | Audi A4 (2006) | Fiat Doblo (pre 2010) | Isuzu DMax | VW T5 California | volkswagen amarok | Nissan Primastar | Jeep Cherokee (version with spare tire on tailgate) | Jeep Wrangler | Peugeot Partner Tepee | Mitsubishi Pajero | Mercedes ML 2002| VW Caddy | Hyundai H1 | Suzuki Splash (2014) | Fiat Ducato | Fiat Fullback | Land Rover Discovery 2 | Land Rover Defender | Mercedes Vito | Range Rover 1999 | Renault Traffic | Toyota Hilux | Mercedes Citan |

Notes for the Audi A4 and Audi A6 (4f) (rear):

On some versions of Audi A4 and Audi A6 (4f) it is not possible to install the standard antenna sensor supplied with the EPS-DUAL 4.0 model with Wireless Display but a specific antenna sensor must be used (details). You can request this type of antenna sensor by indicating it in the notes before sending the order.

Assembly instructions (rear)

Assembly instructions in Italian rear parking sensor mod. EPS-DUAL 4.0 with Wireless DISPLAY

Main features EPS FRONT 4.0 (front)

Incompatible vehicles EPS FRONT 4.0 (front)

The following vehicles are NOT compatible with the EPS-FRONT 4.0 parking sensor:

- Jeep Wrangler

-BMW Z4 (2007)

- Land Rover Defender

- Range Rover (1999)

Assembly instructions EPS FRONT 4.0 (front)

Assembly instructions in Italian front parking sensor  mod. EPS FRONT 4.0

Antenna sensor

Unlike the classic "button" sensors, electromagnetic parking sensors use a single sensor which is applied inside the bumper.

The antenna sensor is an aluminum tape 1 cm high, 3.5 meters long and a few tenths thick.

Once applied from one end of the bumper to the other the excess can be trimmed away.

Details

Where to install the antenna sensor on your car:

We suggest the positioning of the antenna sensor inside the bumper. If your vehicle is not listed on the our site report it to us mail indicating model and year of registration.

By purchasing this product on our site you will be entitled to:

• 3 year guarantee
• Manufacturer's technical assistance
• Italian product

More information

For more information and technical characteristics visit the our site