paint code 798 MBK
Zermatt Silver Metallic
for Land Rover 2005-2022
12 ounce spray cans Touch Up paint for any car.
PLEASE message us with the paint code you want, include the year, make , model, and color name if you know. Do you want base coat ( needs to be clear coated ), or single stage ( has the clear in it ).
If not specified we ship Single Stage paint, the more more information the better the match.
Expedited shipping is not available, Federal rule ground transported shipping only (slow-moving) . Depending on your location the shipping time may be longer than the shipping estimate in eBay
We do not Guarantee color match or Do we warranty paint matching issues due to paint fade, paint surface preparation, weather exposure, application or any other variable.
Directions for use:
Always start by washing the area that you are painting with liquid dish soap and water or wipe the area down with a wax and grease remover. You should then lightly scuff the area that you are painting with a gray scotch-brite pad, this will give the paint something to stick to. If using primer use a red scotch-brite pad before applying primer. After applying primer wait 1 hour (or until fully dried), and then sand with 600 grit sandpaper.
First test the spray can on something besides your car. Do this to get used to how the can sprays. Then spray the area that you are repairing with 2 to 3 coats of color (or until full coverage is achieved) waiting 10 minutes between coats. If you are using clear coat wait 45 minutes before starting to apply the clear coat. Apply 2 to 3 coats waiting 10 minutes between coats.
Flexible Bumpers
Our paints are extremely flexible and can used over metal or plastic. You will not need an additional flex additive for flexible bumpers.
Base coat vs. Single Stage
Base coat colors tend to match better. Most cars produced since 1985 are painted in base coat. You can use Single Stage Paint on these cars for inconspicuous spots. Solid colors usually match well in both single stage and base coat. Metallic and pearl colors match better in base coat. Metallic and pearl colors should be blended before clear coat is applied to hide the repair area. Remember the prep work is critical. The better the surface to be painted the better the end job looks.