Premium Base Coat Touch Up Spray Paint code Dark Copper Metallic for Ford

$33.95
Brand
Wanda
Type
Single-stage Paint
Warranty
Yes
Manufacturer Color Name
Dark Copper metallic
Color
Burgundy
Manufacturer Part Number
code t5 Wanda base coat
Factory Color Code
T5
Paint Type
Urethane Base Coat
Country/Region of Manufacture
United States
Paint Volume
12oz.
condition
New

Dark Copper Metallic code T5

base coat for Ford America

2005 through 2011


12 ounce spray cans base coat 

  Touch Up paint  for any car.

  base coat ( needs to be clear coated ) 

Expedited shipping is not available, Federal rule ground transported shipping only (slow-moving) . Depending on your location the shipping time may be longer than the shipping estimate in eBay

We do not Guarantee color match or Do we warranty paint matching issues due to paint fade, paint surface preparation, weather exposure, application or any other variable.


Directions for use:
Always start by washing the area that you are painting with liquid dish soap and water or wipe the area down with a wax and grease remover. You should then lightly scuff the area that you are painting with a gray scotch-brite pad, this will give the paint something to stick to. If using primer use a red scotch-brite pad before applying primer. After applying primer wait until fully dried, and then sand with 600 grit sandpaper.

First test the spray can on something besides your car. Do this to get used to how the can sprays. Then spray the area that you are repairing with 2 to 3 coats of color (or until full coverage is achieved) waiting 10 minutes between coats. If you are using clear coat wait 45 minutes before starting to apply the clear coat. Apply 2 to 3 coats waiting 10 minutes between coats.

Flexible Bumpers
Our paints are extremely flexible and can used over metal or plastic. You will not need an additional flex additive for flexible bumpers. 
Metallic and pearl colors should be blended before clear coat is applied to hide the repair area. Remember the prep work is critical. The better the surface to be painted the better the end job looks.