RECISION MATTHEWS
PM-1130V METAL WORKING LATHE
FREE SHIPPING!
This machine uses 120V Standard Power!
Highlights Of This Machine:
- New: D1-4 Camlock Spindle Mount Now Standard
- Large 1-1/2? Spindle Bore
- Made in an ISO 9002 Certified Factory
- High Quality Electronics Used Throughout Machine for long term reliability
- POWER CROSS FEED, BOTH IN, OUT, and LEFT and RIGHT, and WILL CUT
- LEFT HAND THREADS TOO
- Super Smooth and Quiet running machine
- Heavy Duty Bed Width 7? (same width as most 12?x36? Machines)
- Variable Speed 120 Volt Single Phase Input Power, 1.5HP Main Motor, AC Inverter Drive
- Variable Spindle Speeds From 75-2000 rpm (2 Ranges, Low 75-500 RPM for more torque, and High 300-2000 RPM for more speed)
- Inch Threads and Metric Threading, Both Right and Left Hand Threading
- Spindle is Dynamically Balanced, Hardened and Precision Ground
- Spindle is Supported by High Precision, Class 5, Adjustable Tapered Roller Bearings
- All Gears and Shafts are Hardened and Precision Ground
- Guideways Induction Hardened and Precision Ground for long life
- REAL INCH LEADSCREW AND FEED SCREWS for even, easy measurements, No Metric Conversions like with many others out there
- Digital Speed Readout Tachometer on face of machine
- 3 Year Warranty ? Best in the industry!
Standard Accessories:
- 6? 3 Jaw Chuck, Scroll Type, D1-4 Mount w/Inside and Outside jaws
- Wedge Type Quick Change Tool Post, with 5 Holders (AXA/100 size)
- Face Plate, D1-4 Mount
- Steady Rest
- Follow Rest
- Micro Carriage Stop
- Inch and Metric Threading
- Thread Chasing Dial
- Headstock Dead Center
- Tailstock Dead Center
- Misc. Tools for operation (Wrenches, etc)
- Variable Spindle Speeds, 1.5HP Motor
- Power Cross Feed, In, Out, Left, and Right Feed
- Left Hand thread cutting with the flip of a lever
- Large 1-1/2? Spindle Bore
- 3 Year Warranty
Main Specifications:
- Distance Between Centers 30?
- Max. Swing over Bed 11?
- Max Swing is Gap No Gap
- Width of Bed 7?
- Spindle Mount D1-4 Camlock
- Spindle Bore 1-1/2?
- Spindle Speeds, Infinitely Variable 75-2000 RPM (2 Steps)
- Cross Slide, Compound, and Tailstock screw pitch: 10 TPI
- Leadscrew Pitch (Main, for threading) 8 TPI
- Longitudinal Feeds .0025-.012 IPR
- Cross Feeds .001-.0056 IPR
- Inch Threads 8 to 56 TPI (8,9,10,11,12,13,14,16,18,20,22,24,26,28,32,36,40,44,48,52,56 TPI)
- Metric Threads 3mm to .5mm Pitch
- Travel of Cross Slide 6?
- Travel of Compound 3?
- Tailstock Quill Travel 4?
- Tailstock Taper MT#3
- Main Motor 1.5HP Variable
- Machine Weight 575 Pounds
- Overall Height (Without stand, chip pan to top of electrical box) 21?
- Spindle Center Height: (Chip pan surface to centerline of spindle) 13-1/2?
- Optional Stand Height: 31?
- Dimensions: 61? L x 28? W (Width is measured from the rear electric box to the top of the cross slide handle, this is max width) Chip pan is 57?L x 17-3/4?W
- Country or Origin: China
- Power Requirements 120 Volt 1 phase, 20 Amp
- Cord Connection/Type: Plug Included, Standard 120V NEMA-5-15, Cord approx. 5? length
