Set of 2 Pontoon Trailer Guide on's (Load Guides) Helps nudge your boat onto the trailer in windy or lakes with a lot of wave action. Also available on ebay as set of 4 if you only want a half set, you can find those in our eBay Store along with many other pontoon and dock products. Designed to place two on rear cross member, and two on middle cross member. Load Guides are designed to nudge the inside of your outer pontoon tubes (one on each side of trailer). Rear set is good for shallow ramps, with middle set being ideal for deep launch ramps. Makes loading your pontoon like a pro easy for everyone, especially on windy days or when loading from a river with a current.

22" tall and angled back so as not to damage most pontoon spray fins. Fits most 4" or 5" frame trailers with either a 3", 4", or 5" tall cross member that is 2" wide. 1 1/2" square steel tube frame with a 1/4" thick steel mounting plate that has four mouting holes 2 1/4" apart, mounts with 2 Ubolts per Load Guide. Complete with all hardware (4- 4" tall U Bolts, 4- 6" tall U Bolts, & 8 lock nuts and washers). Use the 4" U bolts on 3" or under cross members (usually 4" outer frame trailers), use 6" U Bolts on 4"or 5" cross members (usually 5" outer frame trailers).

Ships via FedEx Ground from our location in Elkhart, IN. Must be physical address, cannot ship to PO Box.

Fits the common brands of pontoon trailers. Mid America, Hoosier, Yacht Club, Karavan, Shore Land'r, etc.

Specifically designed to break away rather than damage your pontoon tube.

Pontoon Boat Trailer Guide On's Load Guides SET OF 2