Polyurethane Windshield Adhesive with Fast Curing Formula - High Bond Strength Window Sealant Compound
Product Description
- Immediate Strength Development
- This fast-curing automotive window glue boasts exceptional bonding power.
- One application of the glass adhesive glue is all it takes for permanent weather-resistant protection.
- From windshield and glass sealer to RV window sealant, this compound can do it all.
- Directions for Use:
- - Detach wipers and accents, then use a utility knife to slice through the current urethane sealer
- - Remove existing glass with care, and carefully clean debris from all surfaces
- - Align and dry set the new glass using tape strips for positioning. Once marked, remove the windshield
- - Remove the majority of the old car glass adhesive from the pinch-weld, leaving only a small layer
- - Apply single-step primer* to any bare metal and conduct any required abrasive cleaning
- - Clean the interior surface where contact will be made with windshield and glass sealant
- - Apply a thin layer of primer* around the edge and let dry
- - Cut the applicator tip on the windshield leak sealant to desired size
- - Directly apply this windshield mount adhesive over the old auto window sealant
- - Position the glass using the tape markings, and press into place to complete contact
- - Squeeze out extra urethane windshield adhesive, or fill voids if necessary
- - Remove the tape alignment strips, reattach moldings, wipers, and other accents
- - Finally, clean up any excess windshield urethane adhesive
- * To use without primer, ensure the bonding surface is free from contamination prior to application of the car windshield sealant.
- The glass must also be pre-cleaned with a non-antistatic glass cleaner.
- Additional Instructions: Designed for use at an ambient temperature of 42-95 F.
- Place the car windshield adhesive in a plastic bag and submerge it in hot water before use for best results
- Immediate Strength Development
- This fast-curing automotive window glue boasts exceptional bonding power.
- One application of the glass adhesive glue is all it takes for permanent weather-resistant protection.
- From windshield and glass sealer to RV window sealant, this compound can do it all.
- Directions for Use:
- - Detach wipers and accents, then use a utility knife to slice through the current urethane sealer
- - Remove existing glass with care, and carefully clean debris from all surfaces
- - Align and dry set the new glass using tape strips for positioning. Once marked, remove the windshield
- - Remove the majority of the old car glass adhesive from the pinch-weld, leaving only a small layer
- - Apply single-step primer* to any bare metal and conduct any required abrasive cleaning
- - Clean the interior surface where contact will be made with windshield and glass sealant
- - Apply a thin layer of primer* around the edge and let dry
- - Cut the applicator tip on the windshield leak sealant to desired size
- - Directly apply this windshield mount adhesive over the old auto window sealant
- - Position the glass using the tape markings, and press into place to complete contact
- - Squeeze out extra urethane windshield adhesive, or fill voids if necessary
- - Remove the tape alignment strips, reattach moldings, wipers, and other accents
- - Finally, clean up any excess windshield urethane adhesive
- * To use without primer, ensure the bonding surface is free from contamination prior to application of the car windshield sealant.
- The glass must also be pre-cleaned with a non-antistatic glass cleaner.
- Additional Instructions: Designed for use at an ambient temperature of 42-95 F.
- Place the car windshield adhesive in a plastic bag and submerge it in hot water before use for best results