5 Port(1 PoE in - 4 PoE Out) Gigabit PoE Passthrough Switch
PoE Extender Cascade Repeater
NOTE:
1.This product is a PoE Passthrough Switch, designed to operate by connecting its PoE IN port to a PoE-enabled switch or PoE injector. When connected, it works without the need for an external power adapter.
2. Since most users power this device via PoE, no power adapter is included in the package.
If you plan to use the DC input and require PoE output on LAN1-4 ports, please use a compatible DC 48V-57V power adapter with the following specifications:
DC port: 5.5mmx2.1mm
DC Input Polarity: Positive inside (+), Negative outside (-).
Features:
The PoE extender/switch does not require local power and is powered via the Uplink port PoE input.
Additionally, it supports DC power input: DC 12V-57V, 5.5x2.1mm DC port*
Supports PoE++ (802.3bt) power input, with a maximum of 90 watts input, and a total power output of 72 watts for LAN1-LAN4 PoE.
Supports PoE+ (802.3at) output on LAN1-LAN4.
LAN1-LAN4 Ext mode: Maximum network cable length up to 250 meters, Ethernet speed: 10 Mbps**
LAN1-LAN4 LAN mode: Maximum network cable length up to 100 meters, Ethernet speed: 1000 Mbps
Automatically detects and protects PoE equipment from damage.
Supports IEEE 802.3af/802.3at/802.3bt (maximum 90 watts) Power over Ethernet (PoE) switch
Supports DC 48V-57V passive Power over Ethernet PoE switch
Supports DC 48V-57V passive Power over Ethernet PoE injector
The PoE extender/switch has 5 10/100/1000 Mbps PoE ports, with the Uplink port for PoE input (compliant with IEEE 802.3bt/802.3at/802.3af) and LAN1-LAN4 ports for PoE output (compliant with IEEE 802.3at/802.3af). All ports comply with 10/100/1000BASE-TX.
PoE extenders can increase the transmission distance to 100-250 meters via Cat5E/6E UTP cables. This offers great flexibility in extending PoE distance.**
*When the DC interface input voltage is lower than DC 40V, PoE output on LAN1-LAN4 is disabled. If PoE functionality is required, it is recommended to use a DC 48V-57V power supply.
**Note: When Ext mode is enabled, the maximum bandwidth for LAN1-LAN4 network ports is reduced to 10 Mbps per port. Please check your IP camera's bit rate settings. We recommend that the bit rate does not exceed 8 Mbps (8192 Kbps).
Specification
Support IEEE 802.3af/at/bt power supply
Support DC 5.5x2.1 port input power supply
DC Input Power Pin: positive inside (+), negative outside (-)
Support non-standard PoE 48-57V power supply
Uplink input power supply PoE pins: 1/2(+), 3/6(-), 4/5(+), 7/8(-)
LAN1-LAN4 output power supply PoE pins: 1/2(+), 3/6(-)
PoE total input power: 90 watts
PoE total output power: 72 watts
Maximum power output of a single PoE port: 25 watts
Transmission distance: 100-250m with Cat5e, Cat6, or higher
Ethernet speed: 10/100/1000 Mbps
Network management type: Unmanaged
Environment:
- With 6 KV lightning protection isolation
- International Protection Rating: IP50
- Working temperature: -10 ℃ to 60 ℃ (14℉ to 140℉)
- Storage temperature: -40 ℃ to 85 ℃ (-40℉ to 185℉)
- Working humidity: 10% to 90% non-condensing
- Storage humidity: 5% to 95% non-condensing
Dimensions: 8 cm x 5 cm x 2.2 cm (3.15 inches x 1.97 inches x 0.87 inches)
Product weight: 80g (approximately 2.82 ounces)
Item Included:
5-port Gigabit PoE Passthrough Switch x1