Pneumatic Punch Press Machine Punching Machine 2866LBS/1300kg with Controller

Voltage	110V
Pressure	2866lb/1300kg
The die hole diameter	0.98inch/2.5cm
Working Countertops Size	18.111.8inch/4630cm
Outer diameter of trachea	0.47inch/1.2cm
Adjustable cylinder size	SCJ6.33.9-1.97inch/160100-50mm
Working air pressure	0.5-0.8MPa
Gross weight	234.3LBS（106.5kg）
Package size	21.615.340.9inch(5539104cm)

https://topseller365.com/data/prd/230/230/19.jpg

The pneumatic press is the high-pressure gas produced by the compressor, which is transported to the
solenoid valve through the gas pipe. The working state of the cylinder is controlled by the movement of the
solenoid valve through the switch, and the punching is completed.

1 .Compressed air as power source, high efficiency and easy operation, can reduce labor, can be applied to manual
operation integration, automated assembly line .
2 .Simple structure, convenient operation, cheap price, superior performance, no noise produced during the hydraulic
system and electric standby, can save electricity consumption reduce production cost, has the very high cost
performance .
3. Easy adjustment of output, need to adjust the air pressure is adjustable up to the required pressure, high yield.
4.Equipped with guide plate, high accuracy, can adapt to high speed precision impact load .
5.According to different products or mould, adjust the speed, and the size of the pressure and stamping time .
6.Optional manual switch control, with emergency stop switch, can also be controlled by a controller.
7.Microcomputer control system, can choose manual, semi- automatic and fully automatic operation.


Air source processor, through the pressure gauge at any time to observe the change of air source pressure, effective separation of water, oil and other impurities in the air, air purification, improve the service life of the machine.	High quality cylinder SCJ6.33.9- 1.97inch/160100-50mm, quick action, quick response, travel can be adjusted within the effective range.	Equipped with a controller, easy to switch between manual operation and automatic operation .(single cylinder machine, just set 1, 2, 3 section number. 1 is the pressing time setting; 2 is the second time to increase the setting; 3 is the return time setting)


Two-handed switch, two-handed operation, safer. Equipped with emergency stop switch, one key stop, more efficient.	A clamp with an inner diameter of 0.98 ", equipped with a guide plate, is more precise and stable.	Widened and enlarged work surface with 1.9 "diameter blanking hole, 4 T-slots for easy securing of items.

Note:

1.Check whether the air pipe is properly connected to prevent air leakage and make the machine unable to work normally.

2. Avoid placing your hand under the punching shaft during work to avoid accidents .

3.Do not wipe the machine with a damp cloth to avoid rusting the machine .

strictly prohibited to avoid personal injury .

5.The rated pressure of the air compressor is 0.8mpa. The capacity of the air compressor storage tank is about 60L,the larger
the capacity, the longer the service time and the more stable it is. The displacement is optional 200L/min, the larger the
displacement, the larger the applicable machine model.

6.Note :The actual output pressure is about 80% of the theoretical pressure..

https://topseller365.com/data/prd/230/230/27.jpg

Item Number:

2866LBS/1300kg Pneumatic Punch Press Machine