ORDERS ARE NOT SHIPPED FROM WITHIN USA
FREE INTERNATIONAL SHIPPING
NOTE: International Couriers absolutely require a phone number for customer at destination. When you order please put your phone number in your comments otherwise we cannot dispatch your order.
Replace your Petrogen Torch with SUPACUT Oxy-Gasoline Cutting Torch and fittings to connect to your petrogen hoses.
Connect the SupaCut torch directly to your existing Petrogen hose set. As our torch does NOT require pressurized the fuel you may need to remove the fast flow check valve from your Petrogen system. SupaCut uses the flow of
oxygen thru a venturi in the torch head to suck fuel to the tip so
pressurized fuel is not usually required. When a supacut torch is in use, use crack open the tank fuel cap to allow air to enter the tank. (otherwise a vacuum will develop in the tank preventing fuel flowing to the torch) No more pumping needed!
PRODUCT INCLUDES:
1 x Model 300 SupaCut 21" Cutting torch
1 x Oxygen Flashback Arrestor
1 x Set of Torch Gasoline and Oxygen to Petrogen hose adapter Fittings.
3 x Cutting Tips (up to 10" cut) Bigger tip available for 12" cut
Includes instruction manuals, quick start guide and warranty documentation
Supacut do a DIESEL Torch Kit too.... enquire if Diesel fuel is your preference
Check out our other listings.... we also make Petrogen compatible tips for existing Petrogen torch users
Tools are easy and safe to use.
Patented technology: The DAVCO Oxy-Gasoline cutting torches are a specialized technology product and have several unique design features protected by patent.
DAVCO has a diverse range of flame torch products for many applications and industries powered by Petrol - Gasoline, Diesel. Torches for use by Hand, CNC, Profile and other specialised torches for Robotic cutting systems. We build custom torch products to meet specialised local and international client needs. Need something special ?? Contact DAVCO first and let DAVCO SupaCut light up your life !!
FREQUENTLY ASKED QUESTIONS:
Q. Does the product do all that oxy-acetylene cutting torch does?
A. YES ...and MORE. The SUPACUT Oxy-gasoline system was originally designed as a VERY powerful cutting system and that is its primary strength. The starter set includes the explosion proof tank, fuel hose cutting torch and tips to cut up to 4" thick steel.
However if you want to heat, weld (or braze) there are also optional a heating torch and a welding torch available. If you need to cut or heat, oxy-gasoline is the way to go, as it has much higher performance and the running cost is a fraction of acetylene! If welding is your primary need, yes you can weld with the optional welding torch, however due to the greater oxidizing nature of the oxy-gasoline flame steel welding is more challenging than with an acetylene setup and its extra power limits its suitability for lighter materials.
Q. Can I heat and bend steel?
A. YES, The cutting torch can also be used for heating work, but if heating is the primary need the optional dedicated heating torch performs better.
Q. Can I braze with this system?
A. MAYBE.....Depending on the job, the heating or welding torch can be used for heating pieces to braze large heavy gauge material. Not suitable for very light gauge work, it just has too much power!
Q. Where can I purchase the oxy-gasoline fuel ?
A. Oxy-gasoline is not a single product. The gasoline required is just regular gasoline you buy for your motor vehicle, same place you get fuel for your car or pickup. Kit comes with a specially designed explosion proof 4 liter tank and hose to connect to the torch. Oxygen requirement is same as oxygen for oxy-acetylene. You usually rent or buy a cylinder from a local industrial gas supplier.
Q. Why do you say the oxy-gasoline system is more powerful than oxy-acetylene?
A. Due to the properties of gasoline the gas vapor is about 4 times as heavy (dense) as oxy-acetylene so has much more "punch"
Q. If I need to cut a hole in a piece of steel can I cut through plate or other solid surface or do I have to drill a hole first?
A. No pre drilling is needed. The SUPACUT is MUCH better at punching through metal than an acetylene system. As the vapor is approximately 4 times heavier/more dense than acetylene and the flame is almost 100% oxidizing, SUPACUT can easily cut a hole and has minimal heavy/hot waste (acetylene has about 30% molten steel waste).
Q. Do I need oxygen?
A. YES. Oxygen is needed for the torch to function so a standard oxygen setup is required just the same as for an acetylene system. However, the SUPACUT uses about 30% less oxygen than an acetylene system.
Q. Can I use compressed air instead of oxygen?
A. NO. This will not work with compressed air. Like acetylene system you MUST have OXYGEN to achieve the temperatures required for operation
Q. Does the gasoline tank need to be pressurized
A. NO - the torch is designed in such a manner the flow of oxygen thru the torch draws the gasoline into the tip, then mixes the gasoline and oxygen and the resultant vapor is burnt to provide the cutting flame. the torch "sucks" the fuel from any appropriate tank and then to the torch tip.
Q. How much gasoline does the system use?
A. Gasoline consumption is TINY. As a simple example if you were cutting 1/2" plate with a C100 torch (with a No. 1 tip), in one hour you should be able to cut about 100 ft of plate and use less than 1/4 Gal gasoline (approx. $0.75c gasoline cost) (See chart in pictures).
OPTIONAL ITEMS (please email us for availability):
S300 cutting torch (great for cutting up scrap steel!) 26 &1/2" (675mm) long and cuts up to 12" (300mm)
Welding torch
Heating/brazing torch
Machine mountable torches for automated cutting equipment
Small 1/4 Gal explosion proof gasoline tank.
Large 2.5 Gal explosion proof gasoline tank.
Backpack kit. Designed for ultra portability as required in Police/Fire and other emergency services. Includes backpack, 1/4 gal tank cutting torch.
WARRANTY
12 month back-to-base replacement warranty against failure or faulty manufacture. Normal misuse/abuse exceptions apply.
SHIPPING:
DUE TO INTERNATIONAL ORIGIN GOODS ARE NOT SHIPPED BY USPS GOODS ARE SHIPPED BY International Express Air ex our Brisbane Australia Warehouse or our Shenzhen China Factory.
NOTE International Express Couriers absolutely require a phone number for customer at destination. When you order please put your phone number in your comments otherwise we cannot dispatch your order.
Feel free to ask any questions using the question box at the bottom of this advert. You can also contact us by email
NOTE:
Pictures show various torch models in use and are not necessarily indicative of the S100 torch and starter kit for sale in this listing.
Advertising content protected by Copyright. DAVCO PTY (Davco.biz)