Features and further details

• Feature:   

  High performance Ignition Coil that should produce a better spark, and more efficient burning of fuel so more power and better economy.

• Specification:   

  120 Degree Elbow
  Voltage: 12 volts
  Single Output
  
  Spark plug cap resistance: ≈4.91KΩ
  Measuring 1PZ primary coil: ≈0.4~0.5Ω

  Measuring 1PZ secondary coil: ≈7.51KΩ

  
  

  Mounting points (center to center): 57mm (2 1/4")

  Overall length end to end: 38mm (1 1/2")

  Overall width of main body: 33mm (1 3/8")

  Overall height of main body: 43mm (17 1/4")

• Fitment: 

   1984 Honda Big Red 200 ATC200ES

   1983 Honda Big Red 200 ATC200E

   1982 Honda Big Red 200 ATC200E

   1984 Honda FL250 Odyssey

   1983 Honda FL250 Odyssey

   1982 Honda FL250 Odyssey

   1981 Honda FL250 Odyssey

• Use A Multimeter: 

  Primary resistance test, attach both positive multimeter lead and negative multimeter lead on the primary sides(input sides of the ignition coil).
  
  Secondary resistance test, negative lead on the output side(wire without the spark plug cap)
  and positive lead on the primary sides (both primary sides should get the same reading on the multimeter). 
  
  Now you can twist the spark plug cap(or your old cap) back on(tightly) to do the secondary resistance test again.

• Note： 

  The spark plug cap is removable, just twist it off and can be use on any other different degree spark plug caps. 
  
  Comes with a Free 120 Degree Cap.  
  If you have the longer or different cap you may have to re-use your exciting cap. Just unscrews it if you don't need it. 
• Package Include: