This listing includes a new PAC LPA-E.4 LocPRO
advanced four channel line output converter with remote control, designed for adding aftermarket amplifiers to a factory
radio. The two pair of speaker level inputs are compatible with most factory
stereo systems. They will accommodate up 40 volts per channel (equivalent to
400 watts at 4Ω).
It features incredible input power capabilities, enhanced output
controls, and noise isolation countermeasures. Combined with the newest
vehicle systems' compatibility, these features are the gateway for your
audio aspirations.
One of the best ways to add an amplifier or powered subwoofer to a
factory system is with a line output converter (LOC), which reduces the
factory system's high-level outputs down to the preamp-level signals
your aftermarket amp can handle. PAC's LPA-E.4 LocPro Advanced line
output converter will work with just about any factory system, even
amplified premium systems, to help you add an aftermarket amplifier in
your vehicle.
Additional Notes
We recommend having a professional certified technician handle the installation. For any questions or concerns about the product, please contact us through the "Contact Seller" feature for technical support or customer assistance.
What's included?
- LPA-E.4 4-Channel line output converter
- 2 Phoenix terminals (installed)
- Wired remote (16.25' cable attached)
- Remote mounting bracket
- Four 5/8" Screws
- Two 1/2" Screws
- Quick start guide
LPA-E.4 Features
- Aluminum housing
- 40V / 400W maximum @ 20kΩ
- Low pass filter (CH3/4 only)
- Bass boost (CH3/4 only)
- Dual variable gain controls
- Selectable ground (common, ISO or 200Ω)
- Load selections: 20Ω, 60Ω, 20KΩ
- Clip indicator
- Turn-on mode selection (remote and DC)
- 9.5V Output voltage
- Removable quick-connect with screw-type terminal
- Wide range DC offset
- 4 Channel In & 4 Channel Out Unfiltered OR 2 Channel In & 4 Channel Out Unfiltered
- Independent Clip Indicator for Front and Rear
- LPA-REM Bass level controller included
Model Number: |
LPA-E.4 |
Channels: |
4 IN – 4 OUT |
Operating Voltage: |
9V – 16V |
Max Input Level (20kHΩ Load Setting): |
40V / 400W at 4 Ohms |
Auto Turn On: |
DC Offset / Remote |
Output Voltage MAX at 13.8V: |
9.5V RMS |
Turn On Trigger (DC-Offset): |
3V-7V |
Load Input Impedance: |
20Ω, 60Ω, 20kΩ |
Output Impedance: |
<120Ω |
Variable Gain Adjustment: |
-28dB-+1dB |
Signal to Noise: |
>110dBA at 6.4V Output |
THD+N: |
<0.01% |
Input Sensitivity: |
0.5V-20V |
Frequency Response: |
10Hz – 20KHz |
Current Draw (Max): |
110mA |
Low Pass Filter: |
<250Hz (Rear Channels) |
Bass Boost: |
0dB to +12dB |
Clip Indicator: |
Yes |
Remote Level Control: |
0dB - 30dB |
Chassis Type: |
Aluminum Extrusion |
Terminal Gauge: |
18AWG / Quick Connect |
We recommend having a professional certified technician handle the installation. For any questions or concerns about the product, please contact us through the "Contact Seller" feature for technical support or customer assistance.