Outdoor AC1200 AX1800 AX3000 WiFi 6 Gigabit Wireless Access Point Long Range

$85.0
Modes
AC1200, Dual Gigabit, 4x 7dBi Antennas, Passive PoE
Features
Beamforming, Dual-Band, For Gaming, Long Range, MU-MIMO, Multi-mods, not only AP, POE Powered, Upgraded Chips, Weatherproof
Manufacturer Warranty
1 Year
Number of LAN Ports
1
Unit Type
Unit
Maximum Wireless Data Rate
3000 Mbps
To Fit
Audio Receivers, Car Auxiliary, PC, PS4, Television Set, iPod
Model
Outdoor WiFi Extender
Ports
Ethernet (RJ-45)
Connectivity
Wireless-Wi-Fi 802.11a, Wireless-Wi-Fi 802.11ac, Wireless-Wi-Fi 802.11ax, Wireless-Wi-Fi 802.11b, Wireless-Wi-Fi 802.11g, Wireless-Wi-Fi 802.11n
Unit Quantity
1PC
Brand
WAVLINK
Color
White
Maximum LAN Data Rate
1000 Mbps
Type
Wireless Access Point
condition
New
AC1200, Dual Gigabit, 4x 7dBi Antennas, Passive PoE
 
Features:
Complies with IEEE 802 11a/b/g/n/ac standards
Dual-Band Speed up to 2.4GHz 300Mbps, 5GHz 867Mbps
Weatherproof RJ45 Connector, Integrated Passive Power over Ethernet (PoE)
Passive PoE Support for Flexible Deployment
Provides high performance at a Long-Range Links, depending on its antenna.
Features up to 1000mW of power and an enhanced receiver design
Robust weatherproof case withstands harsh outdoor conditions.
Maximum Security with WPA, WPA2 and WPA2/WPA3 Mix
Support 3 LEDs Wireless Signal Strength
Build in lightning arrester (15kV ESD)
 
Specification:
Frequency: 2.4GHz & 5GHz, speed up to 1,200 Mbps
Interfaces: 1x 10/100/1,000Mbps LAN; 1x 10/100/1,000Mbps WAN 
Antennas: 4x 7dBi omni Antennas
Operation modes: Repeater, AP, Mesh Extender
Weatherproof case: 15KV ESD and 4KV Lightning Protection 
Security:  WPA2-PSK,WPA 2/ WPA 3 Mix
LEDs: 7x Status LED Indicators
Power adapter: 100~ 240V/50~60Hz; DC 24V (Passive PoE)
 

In the BOX:

1 x Wi-Fi AP/Range Extender/Mesh Extender
4 x Detachable Omni Antennas
1 x RJ45 Networking Cable
1 x Power Adapter
1 x POE Converter
1 x Main body holder
2 x Cable ties
1 x Screw fittings
1 x Quick Guide



AX1800 WiFi6, 4 x 8dBi Antennas, Active PoE/Passive PoE

Enjoy True WiFi 6 Speed - Dual-Band maximum speed up to 5GHz 1201Mbps and 2.4GHz 574Mbps,
a latest version of AX1800(1800Mbps); The next generation of Wi-Fi 6, complies with IEEE 802.11 ax/ac/a/b/g/n standards.
With a brand-new chip, it lets you keep more devices(128) connected simultaneously with the dual band,
which is superior choice for seamless HD videos, smooth online gaming and other bandwidth-intensive tasks
 
Professional Outdoor WiFi Solution - Built with a durable IP-67 rated weatherproof enclosure and fiberglass tube high-gain antennas,
this device is designed to withstand harsh outdoor conditions. With 15kV ESD protection and 6kV lightning protection features,
you can be confident it will work normally in rain, snow, wind, thunder, and other bad weather conditions.
 
Multiple PoE Options for Easy Installation - Power Over Ethernet allows for transmission of both power and data over
a single Ethernet cable, makes it easy to install WN573HX1 in locations where electrical outlets may be inaccessible.
Supports both 802.3 AF/AT active PoE and passive PoE. You can use the provided 54V/0.3A passive PoE or a 802.3af/at active
PoE (DC 48V) from other brands. Note: The provided PoE is not waterproof, use CAT5E or above cable that less than 100m/328ft long.
 
Long Range WiFi, Gigabit Ethernet Port - The upgraded 4x 8dBi omni-directional detachable fiberglass antennas and
two built-in high power amplifiers provide up to 200-300m (radius) WiFi coverage and up to 128 connections.
Equipped with gigabit ethernet port that supports 1000/100/10Mbps network.
 
Multiple Modes Compatible - Supports AP, Router, Repeater, Mesh, AP+Repeater modes to meet your diverse needs and
enhance outdoor connections. The Router/AP mode is perfect for converting wired connections to wireless networks.
Used in pairs simultaneously, it supports mesh technology to bring more devices connected, making it easy to achieve seamless
WiFi roaming and eliminating every network dead spot.
 
Advanced Wireless Tech - Supports the latest Mesh WiFi, Seamless Roaming, Band Steering, MU-MIMO and Beamforming technologies.
Back with 1-year warranty and life long tech support. Feel free to contact us if you need any assistance.
 
Specification
- Model: WL-WN573HX1
- Product Size(without antennas): 24x24x7cm/9.4x9.4x2.8in
- PoE Converter Size: 4.4x3.7x2.2cm/1.7x1.5x0.9in
- Length: Antennas - 40cm/15.7in; Ethernet Cable - 100cm/39.4in; Power Adapter Cable - 130cm/51.2in
- Product Weight(without antennas): 1109g/39.1oz
- Standard: IEEE 802.11 ax/ac/a/n/g/b
- Frequency Band/Speed: 2.4GHz(574Mbps)+5GHz(1201Mbps)
- Wireless Security: WPA2-PSK, WPA2/WPA3-MIX
- Antennas: 4 x 8dBi Omnidirectional Antennas
- PAIR/RESET LED: Blue
- PoE Converter Status LED: Green
 
In the Box
1 x Wi-Fi6 Outdoor Mesh Router/AP/Repeater
4 x Omni Antennas
4 x Cable Ties
1 x Ethernet Cable Connectors
1 x Quick Installation
1 x Wrench
2 x Silicone Pads
Several Screws
Passive PoE(Optional):
1 x 54V Power Adapter
1 x PoE Converter
1 x Ethernet Cable
 

How to install antennas and Ethernet cable?
①Pass the RJ45 cable through the waterproof connector cover.
②Screw the waterproof seal into the waterproof connector bracket.
③Pass the RJ45 cable through the waterproof connector bracket, and screw the waterproof connector bracket into the cover.
④Put the waterproof sealing ring on the waterproof connector bracket.
⑤Connect the RJ45 cable to WAN/LAN port.
⑥Screw the connecting cable into the 2.4G and 5G antenna connector and screw up the connector.
Note: The PoE converter is not waterproof, please install it indoors. Please make sure your Ethernet cable is CAT5E or
above certified and shorter than 100m/328ft.

How to install the product on a column?
①Stick two silicone pads on the bracket and post respectively.
②Thread the cable ties through the fixing point of the bracket.
③Fix the product to the post with cable ties.

Warm Tips
①The PoE converter is not waterproof, please install it indoors.
②Please make sure your Ethernet cable is CAT5E or above certified and shorter than 100m/328ft.
③Please install the product 2-3 meters above the ground for better performance.
④Under the mesh mode, WN573HX1 ONLY supports interconnection with WN531AX2, WN583AX1 and WN573HX1.
 

AX3000 WiFi6, 4 x 8dBi Antennas, Active PoE/Passive PoE

Designed for Harsh Outdoor Conditions - Equipped with IP67 waterproof enclosure, 15kV ESD protection and 6kV lightning protection,
it can work normally in rain/snow/wind/thunder and other bad weather. The fiberglass tube high-gain antennas can not only withstand
strong wind and corrosion, but also boost the WiFi coverage, making it more suitable for outdoor use.

Enjoy True WiFi 6 Speed - The next generation of WiFi, complies with IEEE 802.11 ac/a/b/g/n standards. Supports dual-band maximum
speed up to 5GHz 2402Mbps and 2.4GHz 573Mbps, avoiding wireless interference & congestion and offering lightning-fast Internet speed.
With WAVLINK WN573HX3, you can enjoy HD videos, smooth gaming, etc. even outdoors.

Optional PoE Power Supply - Supports 802.3AF/AT active PoE and passive PoE, transferring data and charging the product
with a single Ethernet cable, so you can install the product outdoors where power outlet is not available.
Note: The PoE converter is not waterproof. Please use CAT5E or above cable and the length should not exceed 100m/328ft.

Seamless WiFi Roaming - The 4x8dBi omnidirectional antennas and two built-in high-power amplifiers provide extreme WiFi coverage
and penetration. Also supports Mesh technology, one-click brings more device connections, greatly expanding the WiFi coverage,
and eliminating every network dead zone.

Multiple Modes, Flexible Use - Supports Mesh, AP, Router, Repeater, AP+Repeater and other modes to meet your different
needs and apply to more outdoor connection scenarios. Router/AP Mode is ideal for converting wired connections into wireless networks,
while under Mesh mode you can enjoy seamless WiFi with a single network name and password.

Specification
- Model: WL-WN573HX3
- Product Size(without antennas): 24x24x7cm/9.4x9.4x2.8in
- PoE Converter Size: 4.4x3.7x2.2cm/1.7x1.5x0.9in
- Length: Antennas - 40cm/15.7in; Ethernet Cable - 100cm/39.4in; Power Adapter Cable - 130cm/51.2in
- Product Weight(without antennas): 1109g/39.1oz
- Standard: IEEE 802.11 ax/ac/a/n/g/b
- Frequency Band/Speed: 2.4GHz(573Mbps)+5GHz(2402Mbps)
- Wireless Security: WPA2-PSK, WPA2/WPA3-MIX
- Antennas: 4 x 8dBi Omnidirectional Antennas
- PAIR/RESET LED: Blue
- PoE Converter Status LED: Green

In the Box
1 x AX3000WiFi 6 Outdoor Access Point
4 x Omni Antennas
4 x Cable Ties
1 x Ethernet Cable Connectors
1 x Quick Installation
1 x Wrench
2 x Silicone Pads
Several Screws
Passive PoE(Optional):
1 x 54V Power Adapter
1 x PoE Converter
1 x Ethernet Cable

How to install antennas and Ethernet cable?
①Pass the RJ45 cable through the waterproof connector cover.
②Screw the waterproof seal into the waterproof connector bracket.
③Pass the RJ45 cable through the waterproof connector bracket, and screw the waterproof connector bracket into the cover.
④Put the waterproof sealing ring on the waterproof connector bracket.
⑤Connect the RJ45 cable to WAN/LAN port.
⑥Screw the connecting cable into the 2.4G and 5G antenna connector and screw up the connector.
Note: The PoE converter is not waterproof, please install it indoors. Please make sure your Ethernet cable is
CAT5E or above certified and shorter than 100m/328ft.

How to install the product on a column?
①Stick two silicone pads on the bracket and post respectively.
②Thread the cable ties through the fixing point of the bracket.
③Fix the product to the post with cable ties.

Warm Tips
①The PoE converter is not waterproof, please install it indoors.
②Please make sure your Ethernet cable is CAT5E or above certified and shorter than 100m/328ft.
③Please install the product 2-3 meters above the ground for better performance.
④Under the mesh mode, WN573HX3 supports interconnection with WN586X3, WN572HP3(*Latest firmware required) and WN573HX3.