Features:
- Original Woodpecker Dental LED G Curing Light Lamp Built-in Connect to Dental Unit.
Features:
Sealed, connect to dental unit.
Three working modes: Full power, Ramping, Pulse
360 Degree rotary head, extend the possibility.
Ergonomics design, optimize the hand-grip use.
High power blue light LED.
This device can cure composite resin not less than 4mm in 10 seconds.
LED G adopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time. This device is used to restore teeth and solidify material for whitening teeth.
Technical Parameter:
- Power input: 100V to 240V~ 50Hz/60Hz
Wave length: 385nm-515nm (Wide Spectrum)
Light intensity: 1000mW/cm2~1200mW/cm2
Illumination range: diameter appr. 8mm
Optical fiber dimensions: 12mm diameter, 22mm depth
Dimensions: 1”×1”×10.2” (26×25×260mm)
Net weight: 4.8oz (135g)
Three Working Modes:
Full power: the blue light radiates in full power.
Ramping: The blue light power increases stronger continually, after five seconds reaches to the highest power.
Pulse: The blue light works on the pulse condition. During the operation, aim blue solidification. The working time of all modes is ten seconds.
*Intermittent operation instrument: after work 200 seconds, stop 20 seconds, and then work 20 seconds, stop 20 seconds, work in the rule as above circularly.
FDA Statement The sale of this item may be subject to
regulation by the U.S. Food and Drug Administration and state and local
regulatory agencies. If so, you can bid
on this item only if you are an authorized purchaser. If the item is subject to
FDA regulation, I will verify your
status as an authorized purchaser of this item before shipping of the
item. Seller name:Dentistryshop City,State:SHENZHEN,China Telephone number:0755-23998164
