UX PRO Ultra is a viscous thermal paste designed for thermal pad replacement. It is often referred to as “Liquid Thermal Pad” or “Thermal Putty”. This product was developed and produced by the Computer Systems Research department in Thessaloniki, Greece. Can replace thermal pads up to 3.5mm thick. It is very viscous, and this is why it is ideal for thermal pads 1mm to 3.5mm thick.
This offer is for a 1 X 50g packet. Quantity enough for up to 25 applications.
The packet includes a plastic spatula and 2x finger sleeves.
IMPORTANT NOTICE! This is original Made in Greece product. Be careful of counterfeit imitations Made in China.
Key features
- High-quality gummy / sticky thermal paste designed for use on memory chips and other components where thermal pads are originally used. Ideal to replace thicker thermal pads from 1mm to 3.5mm.
- Thermal conductivity K>16,8 W/m.K * (at least ten times higher than common thermal pads that are used on computers and commercial electronics).
- Can be applied very easily directly on the component and has no electrical conductivity. High operational temperature from -90 to 250 degrees (Celsius).
- No expiration date. Infinite storage/service life. Upsiren UX PRO Ultra doesn’t dry out. Store in a closed can and protect from frost and dust. Made in Greece (European Union).
- Compatible with many gaming laptops, game consoles, high-end video boards, crypto mining, etc.
- Compatible with Apple iMac, Asus ROG, Acer Nitro, MSI laptops, RTX 3080, 2080TI, 3090, 4080, PS4, Nintendo Switch, XBOX, and all systems that use thermal putty or thermal pads.
Applications
Automotive Electronic Control Units
Heat sink, Memory modules
LED Lighting, LCD-TV
Military Electronics
Power Supplies
Telecom services,
Wireless instruments
Automotive control services
No expiration date. Infinite storage / service life.
UX PRO doesn’t dry out. Store in closed can and protect from frost and dust.
Made in Greece (European Union)
* Computer Systems materials science laboratory testing : Method using a comparative technique (P. Karydopoulos, P. Frantzis, N. Karagiannis MSAIJ 2014). Combined thermal conductivity when 1.5mm thick thermal pad is replaced with Upsiren UΧ PRO combined with 1mm thick copper pad.
Shipping options
We keep stock in many countries around the world including E.E. , USA, Canada, Australia, Japan, Singapore, UK and Greece. Depending on your shipping adress we will ship to you from the stock that will be delivered fastest to you.
Please note that we don't sell or ship from China. If you found our products, on another platform, being shipped from China then those are counterfeit products and shouldn't be trusted.
When you should replace the thermal paste / pads in your computer:
·
Thermal paste and thermal pads should be replaced every time that the
heat sink is removed (for cleaning, upgrade or other maintenance). Replacing
the thermal pads and the gummy thermal paste that is used by many manufacturers
on the memory chips is very important when the heat sink is removed. If you
reuse the same thermal pads or paste it is impossible for the heat sink to fit
perfectly again and the component will be overheated and will fail soon.
·
If your computer is overheated or turns off after a few hours of use. In
this case the entire heat sink system must be cleaned immediately and all
thermal paste and thermal pads must be replaced.