Arkfeld Pro
FAQs
Q1: Is the laser on the Arkfeld Pro brighter than Arkfeld?
A1: Yes, the Arkfeld Pro is much brighter. It's a 5mW laser while the regular Arkfeld has a 0.39mW laser.
Q2: Why does the Arkfeld Pro not switch on even after a full charge and only show 1 bar?
A2: It seems like the Arkfeld Pro is in lockout mode. Please press and hold the center button (about 1 second) until the flashlight turns on with the moonlight or laser and the flashlight will be unlocked.
Q3: How to set the automatic turn-off time?
A3: When the light is on, double press and hold the switch, then it will set a time for 3 minutes when the light flashes once, and 9 minutes when it flashes twice.
Q4: Can I turn on the white light and green laser at the same time?
A4: Yes. Besides that, you can also change the brightness level of the white light when they are working in tandem. Just press and hold the central button, and it will change from Low, Med, and High mode. (Moon mode is not included in this setting)
Q5: What is the difference between the early access edition and the official edition?
A5: The optical power of the Arkfeld UV flashlight sold online will drop from 900 to 560 after running for 5 minutes. And its clip is removable.
Q6: How do I switch between turbo and strobe mode on Arkfeld Pro?
A6: The new version of Arkfeld Pro (orders since 12/6/2023 8:00 PM EST) allows you to change between the following settings:
a. Setting 1 (Factory Mode): Double press for Strobe, triple press for Turbo.
b. Setting 2: Double press for Turbo, triple press for Strobe.
c. How to Change: In lockout mode, quickly press the switch ten or more times and hold it on the last press until the white light flashes twice.
* Note: The laser label on the Arkfeld Pro Class 3R you receive may be on the left or right of the flashlight, either is normal.