Oakley Holbrook set of 2 icons .
Easy to install. All you need to do is clean area and install
The icons come pre glued and ready to install
IF THERES NO ICON JUST CLEAN REAL GOOD AND INSTAL NEW ONE.BUT IF YOU LIKE TO EXCHANGE THEM: The icons are glued on with an adhesive, warm with a blow dryer for 30 seconds or so. Take a Pin or sewing needle and GENTLY pry up around the edges of the icon.Don't fall to temptation of prying one end up and trying to rip the icon out. The icon is metal and will bend, or the adhesive will separate. Just work your way slowly around the outside edge until it starts to lift out. Continue to use the pin to lift away at the icon. It's attached with "booger glue" so make sure that it comes with the icon and does not remain stuck to the frame. Now that the icon is off, stick it to a piece of wax paper and move on to the next icon or move it to the glasses you want these icons to stick on, you can repeat this procedure two or three times or until the glue dries up.you can also check youtube ( oakley icon replace )I HAVE MANY MORE ICONS CHECK MY OTHER LISTING los iconos son auténticos oakley y tienen pegamento . no nesesitan nada mas que limpiar el area para reinstalar los nuevos