(NOT A SEW ON PATCH) Custom Your Design HTV Heat Transfer Vinyl Iron On

$3.15
SIZE (Longest part measured)
2.5" Inches
Brand
Unbranded
Country/Region of Manufacture
United States
Unit Quantity
Sold by piece
condition
New

Warning: (THESE ARE NOT EMBROIDERY SEW ON PATCHES) 

These are HTV Flat Vinyl transfers. It will not work on waterproof material or nylon.

Heat Transfer Flat Vinyl Iron On

Can be ironed to Cotton, Poly/Cotton Blend and Polyester.

Order Requirements

Please send high quality image resolution in 300 DPI.  File formats preferred are AI, EPS, PDF, PSD. Other formats accepted are JPEG, PNG, SVG.

No Proofs will be sent. If Design File submitted is useable order will be processed, printed and shipped. Order will ship within 2 to 3 business.

The size of the HTV will depend on the size ordered, we will use the longest side of the image, and it will be proportional to the shortest side.  For example, if the image has a 3 " to 2 " ratio, a size 3 " is ordered, then the HTV size will be 3x2 " inches. 

The color of the print may vary slightly due to difference in monitors and their settings.  Colors will be as close as possible.

HTV Transfers will have white color outline around the image and white background on empty spaces.

 

INSTRUCTIONS:

Preheat garment, press with heat press for 5 seconds.

Remove transfer backing.

Position and place cover sheet over graphic. You can use a parchment paper or teflon / cooking sheet.

Apply heat with a Heat Press at 300F for 10~15 seconds.

House Iron 300F 10~20 seconds. Medium pressure. You need to press the whole transfer. If transfer is bigger than iron surface area, press in parts. You need to press one area for 10~20 seconds, then move to the other area again for 10~20 seconds and make sure you have pressed the whole area of the transfer.  Search online for Apply HTV with an Iron.

Warm peel the transparent masking tape. If the clear transfer tape releases easily then continue to peel, if the clear transfer tape is not releasing easily, place the clear transfer tape over the printed transfer again and iron or heat press again. Then try to release the transfer tape again.

Final Press. After removing the masking film, place a teflon/cooking sheet over transfer and press for 5 seconds.

Do not wash shirt, mask or fabric where vinyl was applied before 24 hours after heat pressed.  

Washing Instructions: 

Machine wash COLD with mild detergent. NO bleach. Dry at a normal dryer setting on household machines. Do not dry clean.