Raytac’s MDBT50Q & MDBT50Q-P is a BT 5.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52833 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PMD, PWM, ADC, NFC and USB interfaces for connecting peripherals and sensors, provides developers flexibility to meet most IoT Application Demanding, Connectivity Range Requirement, BOM Cost Saving, Designs Simplifying, and Time-TO-Market Efficiency.
Features:
-
Embedded 2.4GHz transceiver supports Bluetooth 5.2 ( ), IEEE 802.15.4
( & Zigbee) & 2.4Ghz RF & ANT+ upon customer’s preference.
42 GPIO
-
Compact size with (L) 15.5 x (W) 10.5 x (H) 2.2 mm
-
Low power requirements, ultra-low peak, average and idle mode power consumption.
-
Be compatible with a large installed base of mobile phones, tablets and computers.
-
Fully coverage of BLE software stack.
-
BLE & RF transmission switching helps products fit all operation system and most
hardware.
Certification:
Bluetooth: BT5.2 & BT5.1 & BT5
Regulation: FCC/IC/CE/Telec/KC/SRRC/NCC/RCM/WPC
Antenna Type: Chip Antenna
About The Module:
‧Bluetooth 5.2, IEEE 802.15.4, 2.4 GHz transceiver
‧-96 dBm sensitivity in 1 Mbps Bluetooth low energy (BLE) mode
‧-103 dBm sensitivity in 125 Kbps BLE mode (long range)
‧+8 dBm TX power (down to -20 dBm in 4 dB steps)
‧On-air compatible with nRF52, nRF51, nRF24L and nRF24AP Series
‧Programmable output power from +8dBm to -20dB
‧RSSI (1 dB resolution) ‧Supported data rates:
‧Bluetooth 5.1: 2 Mbps, 1 Mbps, 500 kbps, 125 kbps
‧IEEE 802.15.4-2006: 250 kbps
‧Proprietary 2.4 GHz: 2 Mbps, 1 Mbps
‧Angle-of-arrival (AoA) and angle-of-departure (AoD) direction finding using Bluetooth® .
‧ARM Cortex –M4 32-bit processor with FPU, 64 MHz
‧Memory: 512KB flash / 128KB RAM
‧HW accelerated security
‧128 bit AES / ECB / CCM / AAR co-processor (on-the-fly packet encryption)
‧Advanced on-chip interfaces
‧USB 2.0 full speed (12 Mbps) controller
‧High speed 32MHz SPI
‧Type 2 near field communication (NFC-A) tag with wake-on field, touch-to-pair support
‧Programmable peripheral interconnect (PPI)
‧42 general purpose I/O pins
‧EasyDMA automated data transfer between memory and peripherals.
‧12 bit, 200 ksps ADC – 8 configurable channels with programmable gain
‧4 x 4 channel pulse width modulator (PWM) units with EasyDMA
‧Audio peripherals : I2S, digital microphone interface (PDM)
‧5 X 32-bit timers with counter mode
‧Up to 4 x SPI masters / 3 x SPI slaves with EasyDMA
‧Up to 2 x I2C compatible 2-wire master / slave
‧2 x UART(CTS/RTS) with EasyDMA
‧Quadrature decoder (QDEC)
‧3 x 24-bit real-time counters (RTC)
‧Flexible power management
‧Supply voltage range 1.7V to 5.5V
‧On-chip DC/DC and LDO regulators with automated low current modes
‧Automated peripheral power management
‧Fast wake-up using 64MHz internal oscillator
‧0.4uA at 3V in System OFF mode, no RAM retention
‧1.5uA at 3V in System ON mode, no RAM retention, wake on RTC
‧ Nordic SoftDevice ready with support for concurrent multi-protocol
‧ Operating temperature from -40 to 105 °C
Nordic Solution Bluetooth Module Shipping Policy:
All items are brand new, unused, unopened, undamaged item in its original packaging, such as an unprinted box or plastic bag. (where packaging is applicable).
Usually Ships Within 3 days! Shipment dates excludes importing custom clearance!
Package may have been opened by custom's checking! Import duties, custom taxes and charge are customer's responsibility!
*Terms will subject to change without prior notice!