Key Features:
Made of Premium-grade raw materials
Ultrasonic welded hard wired leads
Staked cell construction 
Ultra-Thin cell separator 
Low-resistance, high-reliability, and consistency
High gauge wire with quality connectors
Long cycle life with 150 times minimum, up to 230Wh/kg energy density
Premium grade battery at low price!!!

Go further and faster with NHX Muscle Pack Lipo Batteries. Built for reliable and consistent performance, NHX Lipo Batteries offers a long cycle life with 150 times minimum, up to 230Wh/kg energy density, and low internal resistance (IR) for more stable voltage output throughout the entire duration of your battery. Our lithium polymer batteries are made of premium-grade raw materials and constructed with ultrasonic welding to reliably deliver consistent power when you need it the most. Each battery comes with high gauge wires with quality connectors to give you that pure burst and performance that you can count on. Our batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market! They are your ideal choices for the RC Cars, Trucks, Crawlers, Airplanes, Drones & Boats.

Specifications:
Voltage Rating: 4S -14.8V
Rated Capacity: 5200mAh 
Discharge Rating: 50C continuous 
Discharge Lead Connectors: 10AWG (150mm / 5.9 in Length ) Wires, XT60 Connector 
Balancing Connector: JST-XH with AB Clip 
Watt Hours: 76.9 Wh 

Dimensions: 
Length: 135mm (5.31 in.) 
Width: 42mm (1.65 in.) 
Height: 38mm (1.49 in.) 
Weight: 544g (1.2 lb)

NHX EZPRO is an AC input high-performance micro processor control charge/discharge station with battery management suitable for use with all current battery types, LiPo, Lilon, LiFe, NiCd, NiMH, PB and also new generation LiHV with end voltage 4.35V. It is an AC input charger/discharger with compact size. The maximum charging power of EZPRO is 65W with maximum charging current 6A and discharging current 2A.
AGM & Cold Charge Modes for PB Battery
NHX EZPRO can charge AGM battery and also can be used for charging PB battery at very low temperatures.
Smart & Efficient Cooling System
Temperature controlled 7000rpm high speed sleeve bearing cooling fan effectively blows the air through the extruded aluminum heat sink, effectively cooling the device.

Specifications:
This product is suitable for charging and discharging LiFe/Lilon/LiPo/LiHV/NiMH/NiCd/PB batteries. For Pb battery, AGM Charge and Cold Charge mode are available

Input Voltage: AC 100-240V
Charge Wattage: 65W
Discharge Wattage: 10W
Battery Types/Cells: LiPo/LiFe/LiIon/LiHV: 2-4 cells , NiMH/NiCd: 6-8 cells , Pb: 3-6 cells

Size and Weight
Case Material: Plastic
Case Size: 118*115*45mm
Weight: 315g
Buttons And Port

Package Includes:
NHX Muscle Pack 4S 14.8V 5200mAh 50C Lipo Battery w/ XT60 Connector
NHX EZPRO AC Charger
AC Power Cord
Deans Charging Cable
EC3 Charging Cable
EC5 Charging Cable
XT60 Charging Cable
XT90 Charging Cable
Instruction Manual