- 12V 24V system voltage identify (battery voltage) automatic. Fit Solar Panel: 520W(12V) 1040W(24V). Solar panel max input 100V
- Extend Battery Live:4 stage charging model Bulk Charge, Boost Charge, Float Charge, and Equalization which make battery more charging safety and battery have more use time
- High Efficiency:MPPT tracking efficiency above 99.5% and charge conversion efficiency as high as 98%
- All Kind of Protection:MPPT solar charge controller auto decide charge power by internal temperature to protect battery. And solar charge controller have below protection function PV over current, short-circuit and reverse polarity protection, night reverse charging protection, battery revers, over voltage, over-discharging and overheating protection, Lithium battery low temperature protection, load short circuit/overload/device overheating protection and TVS high voltage transients protection
Product Description
- The Tracer AN series. Based on common negative design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical.
- The limitation function of the charging power and current and reducing charging power function automatic improve the stability which works even connecting oversize PV modules and in high temperature, and increase the professional protection chip for the communication port, further improving the reliability and meeting the different application requirements.
- With the adaptive three-stage charging mode based on a digital control circuit
- This modular solar controller can be widely used for different applications, e.g., Communication base stations, household systems, and field monitoring, etc.
- The communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection
- With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations
- Monitor and set the parameters via mobile phone APP or PC software
- Full-load operation without any drop in capacity within the range of working environment temperature
- Advanced MPPT technology, with efficiency no less than 99.5%
- Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time
- Wide MPP operating voltage range
- International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product‟s service life
- Compatible with lead-acid and lithium-ion batteries
- Extensive electronic protection
- Charging power and current limitation function
- Battery temperature compensation function
- Real-time energy statistics function
- Overheating power reduction function
- Multiple load work modes
- Charge Rated Current:40A
- System Voltage:12V/24V auto work
- Voltage: 100V
- Consumption: ≤12mA
- Battery Voltage Range: 8V ~ 32V
- RS485 communication interface: 5VDC/100mA
- Grounding type: Negative ground
- Battery types: Gel battery, Sealed lead-acid battery, Flooded battery, lithium battery, User-defined.
- The controller connection sequence is Battery--Load--Solar Panel, and discounect the system in the reverse order Solar Panel--Load--Battery
CAUTION:
- While wiring the controller do not close the circuit breaker or fuse and make sure that the leads of "+" and "-" poles are connected correctly.
- A fuse which current is 1.25 to 2 times the rated current of the controller, must be installed on the battery side with a distance from the battery not greater than 150 mm.
- If an inverter is to be connected to the system, connect the inverter directly to the battery, not to the load side of the controller.
4210AN MPPT Solar Controller
- 12V/24VDC Auto Working
- 100V Max. PV Open Circuit Voltage
- Compatible with lead-acid and lithium-ion batteries
- Advanced MPPT technology, with efficiency no less than 99.5%
MT-50
- Wide LCD screen displays the real time operational data and the working status in digital, graphic and textual forms.
- Basically used for monitoring and setting the controller, it automatically identifies the type, model and relevant parameter data of solar controllers.
RS485
- USB To RS-485 converter is used to monitor each controller on the network using Solar Station PC software and update the firmware.
- The length of cable is 1.5m.
RTS
- Acquisition of battery temperature for undertaking temperature compensation of control parameters, the standard length of the cable is 3m.
- The RTS300R47K3.81A connects to the port on the controller.
- NOTE: Unplug the RTS, the temperature of battery will be set to a fixed value 25ºC.