bullet_point1
All-In-One System Design - The five Channels of Amplification Giv
bullet_point2
Top Mount Controls - Provides for Easy Adjustment of the Amplifie
bullet_point3
Variable Crossovers - Allow Fine Tuning Your System Output
bullet_point4
4Ω RMS Power Output 60W X 4 Channel, 275W x 1 Channel
4Ω Bridged
bullet_point5
Frequency Response 20Hz to 20kHz (4 channels), 20Hz - 250Hz (subw
MTX JH7005
Jackhammer Series 700 Watt Five Channel Full System Amplifier
Easy Access Controls
The JH7005 is fully loaded and ready to drive an entire system. The top panel includes controls for both full range speakers, gain, crossover and frequency adjustment, as well as controls for the subwoofer output including fully adjustable gain, low pass filter, subsonic filter and bass boost.
Only What You Need
The JH7005 has the functionality to power a complete system including full range speakers and subwoofer(s). The input section features high quality RCAs (front, rear, sub) for easy connection to after market head units or processors. The Input Level selection is either Pre or Spk In so it can also be used with factory radios that don't have RCA outputs. The un
MTX Audio JH7005 Jackhammer Series 90W x 4 & 450W x 1 @ 2-Ohm Full Range Class D 5-Channel Amplifier
|
CONDITION:
|
NEW
|
|
BRAND:
|
MTX
|
|
WEIGHT:
|
11.0000
|
|
UPC:
|
715442242153
|
- Highlights -
|
• |
All-In-One System Design - The five Channels of Amplification Gives You System Versatility and Adjustment Capability in a Single Chassis Unit |
|
• |
Top Mount Controls - Provides for Easy Adjustment of the Amplifier Once Installed |
|
• |
Variable Crossovers - Allow Fine Tuning Your System Output |
|
• |
4Ω RMS Power Output 60W X 4 Channel, 275W x 1 Channel
4Ω Bridged 180W x 2 Channel
2Ω RMS Power Output 90W x 4 Channel, 450W x 1 Channel |
|
• |
Frequency Response 20Hz to 20kHz (4 channels), 20Hz - 250Hz (subwoofer) |
Description
MTX JH7005
Jackhammer Series 700 Watt Five Channel Full System Amplifier
Easy Access Controls
The JH7005 is fully loaded and ready to drive an entire system. The top panel includes controls for both full range speakers, gain, crossover and frequency adjustment, as well as controls for the subwoofer output including fully adjustable gain, low pass filter, subsonic filter and bass boost.
Only What You Need
The JH7005 has the functionality to power a complete system including full range speakers and subwoofer(s). The input section features high quality RCAs (front, rear, sub) for easy connection to after market head units or processors. The Input Level selection is either Pre or Spk In so it can also be used with factory radios that don't have RCA outputs. The unit can also be used in either 5-channel, 4-channel or 2-channel modes depending on the Input Mode selection.
High Quality Power and Speaker Connections
The JH7005 can accept up to a standard 1/0-gauge power and ground wire for optimal performance. The speaker terminals can accept up to 12-gauge speaker. Both sets of connectors use set screw style fittings that ensure proper connection and continual signal transfer.
FEATURES
• All-In-One System Design
• Top Mount Controls
• Variable Crossovers
• Selectable Turn On Input
• Selectable Input Signal
• Variable Subsonic Filter
• Remote Bass Knob
SPECIFICATIONS
• Description: 5-Channel
• Topology: Class AB + D
• 4Ω RMS Power Output: 60W X 4 Channel, 275W x 1 Channel
• 4Ω Bridged: 180W x 2 Channel
• 2Ω RMS Power Output: 90W x 4 Channel, 450W x 1 Channel
• THD: Less Than 1%
• Signal to Noise Ratio: 60dB
• Frequency Response: 20Hz to 20kHz (4 channels), 20Hz - 250Hz (subwoofer)
• Crossover: 40Hz to 250Hz, 12dB/Oct
• High Pass Filter: 40Hz to 250Hz, 12dB/Oct
• Subsonic Filter: 20Hz to 50Hz, 12dB/Oct
• Bass Boost: 0 - 12dB @ 45Hz
• Maximum Input Signal: 10V
• Height: 2.57" (65.2mm)
• Width: 7.61" (193.4mm)
• Depth: 15.47" (393mm)
