The Mo-Unit Blue Digital with Bluetooth connectivity. Replaces a motorbikes fuse box allowing for full custom wiring looms and controls
If you’re looking for a way to revolutionize your riding experience, then look no further. Motogadget are the best in the business at creating exquisite and innovative aftermarket parts for your motorcycle, and the mo.unit blue digital control unit is a game changer. It is the electrical hub of your motorcycle, replacing the fuse box and most importantly enabling Bluetooth® LE connection to the ‘mo.ride’ app on your smartphone.
This App will control the entire setup and alarm system - faults can easily be diagnosed at any time or place, and can even be relayed into a headset in your helmet in real time. The app will update you with any reports of faults or alarm activity, including if your bike is on the floor. Furthermore, it enables the use of the Keyless Go function, allowing you to simply approach your bike with your smartphone, and it will be ready to start.
The unit can be operated using conventional handlebar switches, or pairs perfectly with the range of Motogadget buttons. You will be able to control all functions of the bike from this hub.
Truly the sort of thing 007 would only be able to dream of, the mo.unit blue will turn your pride and joy into a cutting edge vehicle with immense subtlety. Guaranteed to make you the envy of all your biker mates.
Features WITHOUT smartphone and mo.ride App
- Complete digital control using buttons possible with 4 or 5-button operation.
- Complete replacement for the fuse box. 10 independent circuits are digitally monitored and switched off if there are faults. After the fault is rectified, the safety function is automatically reset.
- Integrated alarm system that can be installed in any position.
- Integrated, digital flasher relay that is load-independent; automatic switch-off optional and can be set; mo.wave mode can be selected.
- Integrated hazard warning light.
- Turn signal can optionally be set as a positioning light.
- Integrated parking light and headlight flashing.
- Lo-beam and Hi-beam (up to 200 W switched capacity) can be controlled using only one button.
- Integrated, digital brake light modulator; flashing mode can be programmed.
- Acceleration-controlled emergency brake light (automatic warning signal).
- Integrated starter relay for the starter system with solenoid (up to 30 A switched capacity).
- Intelligent and configurable management/switch-off of power consuming devices so that the maximum starting energy from the battery can be used when starting the motorbike.
- Integrated, digital horn relay.
- Two configurable additional outputs AUX1 and AUX2.
- Diagnostics function for assigning inputs, outputs, the circuit switching status, short circuit diagnostics etc.
- Calibration and current measurement enables faults to be detected on all lamps.
Features WITH smartphone and mo.ride App
- Encrypted connection via Bluetooth® LE (Low Energy) for manipulation protection and lower smartphone and mo.unit blue energy usage.
- Keyless Go (the on-board electrical system is switched on when you approach the motorbike with your smartphone).
Alarm events are sent via Bluetooth® to the App (with date, time, vehicle on the floor etc.). - Alarm system mode and sensitivity can be adjusted.
- The on board voltage can be monitored in the App.
- Diagnostics on all inputs and outputs; current, voltage and device temperature measurement.
- Real-time audio fault messages issued via the helmet headset.
- Outputs can be switched manually via smartphone (except for starter).
- Firmware updates provided anywhere via smartphone and App without removal.
- Setup menu can be configured anywhere via smartphone and App without removal.
- Speedometer input for comparing the vehicle mileage with mo.ride can be used for vehicle management with automatic alerts for maintenance tasks, the condition of the tires, chain, brake pads, oil, operating fluids, spark plugs etc.
- Logbook for recording journeys and displaying the vehicle status, alarm events and maintenance tasks.
- Parking position display and Ping! for help locating the vehicle.
- LIN bus connection for connecting to compatible motogadget products at a later date.
Includes
- Mo-Unit Blue
- 1 x M5 stainless steel bolt
- 2 x M5 stainless steel bolts with nut
- 1 x speed sensor with 2 magnets
- Detailed installation and operating instructions
Attention: The battery cable is no longer included with this kit. Please purchase separately.
- L/W/H - 90 x 53 x 30 mm, bolt distance 74 mm
- Weight - Approx 180g
- Fastener - 2 x M5 stainless steel bolts (installation and ground connection), 1 x M5 screwing contact for battery positive connection
- Operating voltage - 6V-20V
- Operating temperature - -20° to +80°C
Inputs
- 1 x input (+12 V switched) for ignition lock or mo.lock
- 11 x control input (minus/switched to ground) for:
- Left turn signal
- Right turn signal
- Lo/Hi-beam
- Starter
- Horn
- Brakelight
- Kill switch
- Side stand switch
- LIN bus
- AUX1
- AUX2
Outputs
- 10 x Outputs (+12V) for:
- Left turn signal
- Right turn signal
- Lo-beam
- Hi-beam
- Starter
- Horn
- Brakelight
- Ignition
- AUX1
- AUX2
Note - Currently this product is not compatible with Apple IOS 18