MKP Capacitor 0.47-47uf ±5% 250V - Audio Grade - Speaker Crossover Film Cap

Slide
$2.75
Value (uF):
10uF
Brand
Unbranded
Mounting Style
PCB Mount
Series
MKP
Type
Film Capacitor
Tolerance Rating
±5 %
Capacitor Construction
Metallized Polypropylene Film
Termination Style
Axial
Capacitance Rating
Multiple Values
Material
Polypropylene
Maximum Operating Temperature
85 °C (185 °F)
Minimum Operating Temperature
-40 °C (-40 °F)
Maximum Operating Voltage
250 V
condition
New
Audio Grade Metallized Polypropylene Foil, Axial-Type, Non-Polarized Capacitors.

High current capacity, excellent frequency characteristics, low-ESR and low dissipation factor.

Suitable for use in loudspeaker crossovers, replacements or upgrades for coupling capacitors signal path of amplifiers or other audio equipment and as general purpose film filtering capacitors when needing low ESR and high current capability.

Specifications:
  • Voltage Rating: 250VDC
  • Capacitance Tolerance: ±5% (J)
  • Dissipation Factor: 0.08% Max at 1KHZ
  • Operating Temperature Range: -40C - +85C
  • Insulation Resistance: >10000MΩ
  • Lead Length ≥32mm
The Audiophiler and CYOG branded capacitors are manufactured to the same specifications.

Dimensions (Height x Width x Length):

  • 0.47uF - (8mm x 12mm x 20mm), ±1mm
  • 0.68uF - (8mm x 14mm x 20mm), ±1mm
  • 1.0uF - (8mm x 14mm x 21mm), ±1mm
  • 1.5uF - (7mm x 13mm x 26mm), ±1mm
  • 1.8uF - (8mm x 15mm x 26mm), ±1mm
  • 2.0uF - (8mm x 15mm x 26mm), ±1mm
  • 2.2uF - (8mm x 16mm x 26mm), ±1mm
  • 2.5uF - (8mm x 16mm x 26mm), ±1mm
  • 2.7uF - (8mm x 16mm x 32mm), ±1mm
  • 3.0uF - (9mm x 17mm x 32mm), ±1mm
  • 3.3uF - (9mm x 17mm x 32mm), ±1mm
  • 4.7uF - (11mm x 19mm x 32mm), ±1mm
  • 5.6uF - (13mm x 21mm x 32mm), ±1mm
  • 6.8uF - (13mm x 21mm x 36mm), ±1mm
  • 8.2uF - (14mm x 22mm x 36mm), ±1mm
  • 10uF - (15mm x 25mm x 36mm), ±1mm
  • 12uF - (14mm x 23mm x 46mm), ±1mm
  • 15uF - (15mm x 20mm x 46mm), ±1mm
  • 18uF - (18mm x 28mm x 46mm), ±1mm
  • 20uF - (18mm x 28mm x 46mm), ±1mm
  • 22uF - (22mm x 32mm x 46mm), ±1mm
  • 33uF - (27mm x 36mm x 46mm), ±1mm
  • 47uF - (27mm x 36mm x 56mm), ±1mm

The majority of these capacitors that I've tested measure within ±3% of their stated value.  If you receive one that measures outside of the rated ±5% message me and I'll send a tested replacement that is within spec or issue a full refund.  

The ESR from the capacitors I've tested measured comparably to those of equivalent value from well known crossover component brands such as Dayton Audio, Jantzen and Audyn.

Mix and Match, $5.50 Flat Rate shipping per order on any quantity or selection of qualifying items added to your cart.