Note: Design has been revised to accommodate the width of the HD12.0 12Ah battery but the photos do not reflect the slightly wider design.
This listing is for a 3D-printed mount for Milwaukee M18 Red Lithium 18V batteries
The mount was designed and developed by me. I only sell 3D-printed products that I've designed from scratch.
Highlights/Features:
- slightly angled outwards for easier battery access
- there are left and right "ramps" for battery latches to easily glide and click into place
- battery locks snugly in place so you can mount this on a wall, under a cabinet/tool shelf, sideways, or even upside-down (not sure why you'd want to do that but you can!)
- mount it using #8 wood screws with countersunk head (not included)
Designed & Made in USA; Shipped from USA (California)
Material and Color Options:
- PLA plastic - Indoor applications (up to 125°F)
- PETG plastic - Outdoor OR van/truck applications (up to 160°F)
- Both available in either Red or Black
Dimensions:
- 4 batteries: 13"W x 3 1/4"H
- 3 batteries: 9 9/16"W x 3 1/4"H
- 2 batteries: 6 1/8"W x 3 1/4"H
- 1 battery: 2 11/16"W x 3 1/4"H
(batteries protrude 1/4" past the sides of the mount so please add an additional 1/2" to the width for mounting space considerations)
Important Notes:
- Not to be installed in locations that can exceed 125°F for prolonged periods for PLA material or 160°F for PETG material.
- Some photos include photos of batteries but are only for visual reference.
- BATTERIES are NOT included in the sale.