MechMaxx 3-Point PTO Powered Offset Flail Ditch 72" Bank Mower, 70-100Hp, VAM72

$3704.05
Brand
MechMaxx
Power Required
70-100 Hp
Working Width
72in
Model
VAM72
condition
New
Model VAM72 Mower-70-100 HP, 72" Working Width

Product Description

150201

Our bank mowers are built to efficiently handle overgrown grass on ditches and embankments.

Powered by a 65HP CMR gearbox from Italy for consistent performance, Equipped with forged hammer flail blades, Includes an adjustable rear opening panel for convenient maintenance accessthese mowers can cut and mulch material up to 3" in diameter in one pass. The finely shredded cuttings act as a fast-decomposing, micronutrient-rich fertilizer, nourishing your land. The trimmings drop directly to the ground, reducing debris. Plus, an adjustable rear roller provides precise cutting height control, ensuring a clean, even cut on uneven terrain.

The 72" model, built for Category 2 tractors, pivots 90 degrees up and 55 degrees down, delivering a precise, clean cut every time. PTO shaft w/safety pin; dynamically balance tested for safe and reliable operation

•72 in working width for time-saving, economical mowing of bigger areas such as fields, long ditches, building perimeters and large yards

•This mower can keep your mowing area as short as possible with 18 number of blades.

•Compatible with 70-100 HP tractors and operable at 540 RPM for powerful, efficient mowing capabilities.

【NOTE】Free lift-gate + free return services.  Please leave a valid phone number and ensure it is reachable so that the carrier can schedule a delivery time with you.

Power Required 70-100 Hp Belt Adjustment Bolt Tightening
Working Width 72in Working Efficiency450 cu.ft./Hr. 450 cu.ft./Hr.
Overall Width 79 in PTO Shaft Speed 540 rpm
Blade Ground Clearance 0.6 in-3 in Deck Thickness 2 in
Max. Cutting Diameter 3 in Side Plate Thickness 0.25 in
Offset Distance from The Center (Maximum) 90 in Driveline Shaft Length T5-LF-63  With Shear Bolt ; 63in-106in
Tilt-Up Angle 90°