MAINS EHU INSTALLATION KIT VW CAMPER VAN hookup hook up 2x13A 16A selfbuild BLK

This listing is for a 16A mains installation kit.

Please note: We are generally able to offer this kit with variations such as colour of external inlet and also a surface mount one as shown in the third photo. Please enquire before purchase as there may be a small additional charge and also we will need to ensure we have what you require. The surface unit is NOT included as standard in the kit.

APPLICATIONS INCLUDE:

Caravans, Self build Camper vans, Motorhomes, Boats, and other vehicles that require hook up via a 3 pin caravan type lead.

The kit includes all the parts required for a standard installation.

*NOTE! Due to the range & type of vehicles we have not included the screws for fixing the inlet to the side of the vehicle.

SPECIFICATION: The Consumer unit is ready for installation and includes a mains polarity warning lamp. This is an important feature, as reveresed polarity is potentially lethal and quite commonplace particularly on the continent. A label is provided with the consumer unit with regard to the RCCB operation. This unit is specifically designed for use in vehicles.

* Consumer unit dimensions H181 x W110 x D96mm approx

* The unit will indicate a reversed input polarity via the Red neon indicator.

This unit is produced specifically for Caravans and Motorhomes etc.

CONTENTS INCLUDE:

* Consumer unit: 1 x 25A RCCB 30mA 1 x DP MCB 10A

* 5 metres of white 1.5mm sq flexible mains cable for wiring 13A mains sockets etc

* 2.5 metres of blue 2.5mm sq flexible mains cable for wiring from inlet to consumer unit.

* 1 metre of yellow/green earth wire for connecting incoming earth to chassis for safety.

* Deluxe satin black flush fitting 16A mains inlet made by ABL sersum in Germany with spring loaded flap and magnetic catches 

Requires a standard male to female hookup lead to connect to site mains, supplied with stainless A2 screws and foam gasket.

* Twin flush fitting 13A C-Line CBE type sockets with faceplate & saftey rear covers.

* Bag of cable ties sticky bases and screws (for consumer unit and mains inlet in stainless steel)

* Instruction leaflet supplied

Please note the last two photo's are shown to illustrate alternative components that can be supplied with this kit. The surface mount power inlet and the two individual 13a sockets are NOT included but are available as an alternative to the black mains inlet or twin 13a sockets. Please request alternatives at the time of ordering.

We also stock various other kits in the range, these include:

A grey or white main inlet unit

2x twin 13a sockets or 1x twin and 2 x single 13a sockets (these 4 socket versions are supplied with 5m of the blue cable and 10m of the white)

We also stock some similar kits with a non magnetic square inlet in black, white or beige at lower cost.