Features
- Mount your Garmin Edge or Garmin Varia device to various items with a strap; backpacks, saddle bags, etc.
- Garmin interface rotates to suit both horizontal and vertical installations.
- Lightweight and secure, weighing just 19grams without hardware.
Please note the Garmin devices and saddle bag pictured are for reference only and not supplied.
What's Included
- 1x 3D printed mount, 2x M3x12mm countersunk screws, 2x M3 Nyloc nuts.
Overview
This MagCAD Mount is a real master of all trades. It suits both the Garmin Edge and Garmin Varia devices and attaches to various items with straps. This could be the strap on your rucksack when out hiking or the strap on the back of your saddle bag when cycling.
The rotatable interface allows the mount to be used both horizontally or vertically. It will suit straps up to 28mm wide and 0.5-1.5mm thick and requires a clear 32mm length of strap.
Application
To attach the mount first disassemble all three 3D printed parts and rotate the Garmin interface to suit your particular installation. Reassemble and clamp the mount around your strap. tightening the 2x M3 countersunk screws. The mount should grip the strap without excess clamping force.
To attach the mount first disassemble all three 3D printed parts and rotate the Garmin interface to suit your particular installation. Reassemble and clamp the mount around your strap. tightening the 2x M3 countersunk screws. The mount should grip the strap without excess clamping force.
We recommend tethering your device just for extra security and to avoid accidentally dropping it when installing or removing it.
Material
MagCAD Mounts are 3D printed in Nylon PA12. However these are not your typical home 3D printers. Following a process of SLS (Selective Laser Sintering) on industrial size printers, costing anything above £100k, the resulting mounts have fantastic resolution and refinement. The surface finish is slightly rough with a matte effect and the performance of the mounts are comparable to injection moulded parts.
Customisation
As with all MagCAD items it's more than possible to tweak or change the design to suit your particular installation. Feel free to get in contact for more details.
About Me
I’m a MEng Aerospace Engineer and former professional cyclist. All the items, including this mount, are ones which I’ve developed and use myself. A hobby which I take too far but want to share with others.
Delivery
All items in stock and dispatched promptly, usually the same day.
Returns
Should you have any issue or just change your mind we're happy to accept returns within 30 days, providing the item is unused.