Introducing the absolute best way to organize your ratchet drawer!
The 3 Piece Set includes one each 1/4″, 3/8″ and 1/2″ ratchet holders with (3) handle supports. Selecting an individual drive size is for (1) holder for that drive size and the accompanying support.
Our ratchet holders feature magnets on each side to interconnect with our full line of MagAttach magnetic interconnecting holders. We have also put magnets in the base to prevent them from sliding around when drawers are opened and closed. Each ratchet holder also includes a support, with two base magnets, for the handle side of your ratchet
Dimensions/Fit:
The universal ratchets holders are designed to accommodate over 90% of ratchets on the market. We do however recommend you check your ratchets dimensions and compare the table below (also shown in the dimensions image).
| Drive | Length (L) | Width (W) | Height (H) | Inside Width (IW) | Anvil Diameter (AD) | Anvil Depth (AD) |
| 1/4″ | 1.25 | 1.39 | 0.90 | 1.00 | 0.40 | 0.60 |
| 3/8″ | 1.50 | 1.67 | 0.90 | 1.28 | 0.65 | 0.60 |
| 1/2″ | 1.87 | 2.08 | 0.90 | 1.70 | 0.80 | 0.60 |
Notes:
*3D printed parts do vary slightly from piece to piece.
** Tools shown in images are NOT included. This is for the holders(s) ONLY.