***US BASED SELLER***Based in Waterford, MI
The markings on the micro switch say 120VAC to 250VAC but they work just fine with both 12 VDC and 24VDC. The switch is very flexible but the LED light in the switch must be powered by either 12 or 24VDC.
I have a full pallet of over 5000 switches so if you would like a volume buy, get this little 30 pack and try them out and then contact me and we can do some dealing.
The wiring is as follows:
Red - common (connected to source positive)
Black - normally open (connects to load positive)
White - LED positive (connect along with normally open black wire for the LED to light when pushed, connect along with above red for continuously on LED)
Blue - LED negative (connect to source negative along with load negative)
Easy peasy and I made a video showcasing a couple of items wired up to these switches showing their brightness and function. Copy and paste this video link in the youtube search bar and it should come right up.
Crazy youtube will ask above the videos if you meant wavE 5G, (DO NOT CLICK THIS!)
It is followed by "search instead for....". Click the "search instead for...." and my video comes right up.
Dave