Tuya WiFi Smart Infrared Detector PIR Motion Sensor Human Body Induction Alarm
Wireless Motion Sensor, A Must-have for Smart Home Living
- Newly upgraded technology with anti-interference algorithms to avoid many interferences, make sensing more sensitive. The sensor with bracket can be tilted 90° in all directions,suitable for any corners in the house.
- Wothfav motion sensor switch can detect motion as soon as someone enters the sensing range, and auto turn on the light, hands-free operation. Never walk in dark anymore!
- Tired of forgetting to turn off the lights when leave the room? Our motion sensor can auto turn it off when motion is no longer detected within range, help to save energy and electric bills.
- Max RF range between sensor & plug: 150m/ 492FT(Straight transmission distance), 30m/ 98.4FT(Indirect distances, e.g. partition walls); Max sensing range between human & sensor: 12m/ 39.37FT, No wiring is required, say goodbye to tangle of messy wires, control your household appliances with ease.
More product descriptions:
- Upgraded motion sensor: The Wothfav motion sensor adopts innovative technology with anti-interference algorithms to avoid many interferences. It automatically turns on lights or other electrical devices when entering the sensing range and automatically turns off devices when leaving, saving energy. The sensing distance has been extended from 3 meters to 12 meters, significantly improving sensitivity.
- Wide sensing coverage: The sensing range between humans and sensors can reach up to 12 meters/39 feet, with a maximum field of view of 120 º. The RF range between sensors and plugs can reach 150 meters/492 feet (linear distance) and 30 meters/98.4 feet (indirect distance, such as partition walls and bends). Attention: Use 2 AA batteries (not equipped), with a buckle design in the battery position to prevent loosening or disassembly.
- Three adjustable sensing modes: ① Delay time setting (3 seconds, 10 seconds, 30 seconds, 1 minute, 3 minutes, 5 minutes, 10 minutes, default value: 30 seconds), ② Light sensing setting (suitable for all day/low light/dark environment, default: all day), ③ Sensing range (near: 0-4m (0-13FT), medium: 0-8m (0-8m)- 26FT), far: 0-12 meters (0-39 feet), default: 0-8 meters, can be adjusted using blade tools before installation.
- Wireless installation: No wires required, there are two optional installation methods. You can install the base on the wall with screws (requiring drilling), or fix the base on the wall with a magnetic adhesive plate (without drilling). Sensors can adjust any angle in any direction to meet your different sensing angle requirements.
- Multiple uses: widely used in most household appliances, such as lamps, fans, air conditioners, exhaust fans, humidifiers, etc. Very suitable for bedrooms, laundry rooms, bathrooms, stairs, garages, corridors, basements, and parking lots. Hands free operation allows you to never walk in the dark, making your life more convenient!
How to use:
Pairing settings:
① When the plug is powered on, the red and blue lights will be displayed. After pressing for 5 seconds, the red and blue lights will switch to blue lights and flash quickly.
② After installing 2 * AA batteries on the infrared, press and hold the reset button until the blue light on the socket flashes quickly and converts to a fixed red and blue light, indicating successful pairing and control.
Note:
▫️ The plug and infrared have been paired, and there is no need to pair them again. They can be used directly when powered on;
▫️ After installing 2 * AA batteries on the infrared sensor, the plug can be controlled (for infrared sensors that do not come with batteries);
▫️ If there are obstacles, the signal will be slightly weak;
▫️ One socket can be paired with two infrared sensors, and when paired with the third one, the first one will be covered.
Lighting and distance settings:
Default delivery mode: All day light, medium distance, 30S
① You can set the time according to the modulation method: such as 3s, 10s, 30s, 1 minute, 3 minutes, 5 minutes, 10 minutes (automatically turn off after exceeding the duration, and automatically turn on when there is induction);
② Detect the light scene in three levels: all day, night (suitable for lighting, in this mode, the lights that are not connected during the day will not be turned on), and dim;
③ Adjustable distance in three levels: 0-4M for close range, 4-8M for medium range, and 8-12M for long distance.
Specifications:
Socket size: 5cm * 5cm * 5.3cm, net weight 51g;
Infrared sensor size: 9cm * 5.3cm * 3.8cm, net weight 48g;
Material: ABS+PC
Specification: American AC110-240V 16A
Infrared sensor size: 9cm * 5.3cm * 3.8cm, net weight 48g;
Material: ABS+PC
Specification: American AC110-240V 16A
The package includes:
American standard socket * 1-10
Infrared sensor * 1-10
Support * 1-10
Paddle * 1-10
Screw pack 1-10 (Each one including 1 5mm small screw+2 1.5cm screws+2 screw expansion screw sleeves)
English and German instruction manual * 1
(PS: The package does not contain batteries)
Infrared sensor * 1-10
Support * 1-10
Paddle * 1-10
Screw pack 1-10 (Each one including 1 5mm small screw+2 1.5cm screws+2 screw expansion screw sleeves)
English and German instruction manual * 1
(PS: The package does not contain batteries)
Note:
- The max current allowed for the plug is 16A, higher current is prohibited.
- It is forbidden to use this product under humid and high temperature conditions.
- The plug and motion sensor is already paired before leaving factory. Please follow instruction if it's required for re-pairing.
- The motion sensor have set the default modes: delay time setting (default: 30s), light sensing setting (default: available for full-day), sensing range (default: 0-8m/0-26FT), please use the paddle tool to switch carefully if needed.
|
|
|
|---|
