If you do not see your car in the compatability list (e.g. Hyundai, Kia, Zoe, Polestar 2, etc) just ensure your EV cable is a standard type 2 and this lockable holder will work for your cable.
LOCKABLE EV CABLE DOCKING STATION. Simply latch and lock to stop unauthorised use of your type 2 charging cable. The holster recess is weatherproofed too to help keep the connector end dry in rain, hail, snow and more.
WEATHERPROOF PADLOCK. A dedicated combination padlock is included as standard. Set your own code. The holder can be used with the padlock (e.g. when you're away) or without (e.g. when you're at home) for ease of access.
CABLE HOOK. Use the built-in cable tidy to neatly loop and store the cable itself, to stop unsightly dangling or tangling.
WALL MOUNT DESIGN. Lightweight and low profile, simply use the supplied install pack to affix the wall mounting plate and hook on the holder unit. That's all there is to it.
WHAT'S INCLUDED. 1 x lockable EV cable holder, 1 x wall mount plate, 1 x padlock, 4 x wall plugs and screws and 1 x quick install guide and Warranty information. NB: This holder is only suitable for Type 2 EV charging cables compatible with cars such as Tesla, Nissan Leaf, KIA, Polestar, and many other makes. EV charger and cable are NOT included.
Want peace of mind that someone can't just turn up and plug their car into your home electric vehicle charger?
Prevent unauthorised use of your charger with our lockable holder socket. Designed for use with a type 2 EV charging cable. Simply click and connect your cable and use the built-in hook to wrap the cable itself around for a neater look on your wall.
What's more when the connector housing is weatherproof so once you latch the cable it'll keep the plug end dry during rainy days and as it also has a UV coating to reduce heat warping the connector shielding in hotter days.
An install pack with wall plugs and screws as well as a dedicated padlock are included too. Just drill a few holes, affix the mounting plate and hook on the holder. Job done.
Now you can rest easy when you're away from home knowing that your cable is locked and loaded so no one else can use it without your permission.
NB: The holder body is designed to be removable from the wall but note that so long as you have padlocked your cable it will remain fastened to the holder and cannot be used. Suitable for type 2 cables only. EV charger and charging cable are not included.
Also note if using your own padlock please only use a 4mm diameter shackle padlock for optimum locking operation. A smaller diameter shackle should NOT be used as it will not prevent cable release if the button is pushed down far enough.
Prevent unauthorised use of your charger with our lockable holder socket. Designed for use with a type 2 EV charging cable. Simply click and connect your cable and use the built-in hook to wrap the cable itself around for a neater look on your wall.
What's more when the connector housing is weatherproof so once you latch the cable it'll keep the plug end dry during rainy days and as it also has a UV coating to reduce heat warping the connector shielding in hotter days.
An install pack with wall plugs and screws as well as a dedicated padlock are included too. Just drill a few holes, affix the mounting plate and hook on the holder. Job done.
Now you can rest easy when you're away from home knowing that your cable is locked and loaded so no one else can use it without your permission.
NB: The holder body is designed to be removable from the wall but note that so long as you have padlocked your cable it will remain fastened to the holder and cannot be used. Suitable for type 2 cables only. EV charger and charging cable are not included.
Also note if using your own padlock please only use a 4mm diameter shackle padlock for optimum locking operation. A smaller diameter shackle should NOT be used as it will not prevent cable release if the button is pushed down far enough.