Lift Safety Dax Hard Cap Natural HDFC17NG
The DAX Cap a fiber reinforced resin hard hat offering a 6 point suspension system for superior comfort and impact protection. It features an innovative Clarino® synthetic leather comfort dome and an over-sized ratcheting fitment dial that makes adjustment easy even while wearing gloves.
Lift Safety Dax Hard Cap Natural Features:
Fiber reinforced resin shell for superior impact protection
Brim grip, exclusive design provides a secure feel
Perforated Clarino® synthetic leather comfort dome with molded EVA foam insert for additional shock absorbing protection to the top of head
Oversized ratcheting fitment dial to adjust size, easy to grip and use with gloves on
Meets ANSI Z89.1-2014 REQUIREMENTS FOR TYPE 1 CLASS G & C, or C
Moisture-wicking foam backed microfiber liner reduces sweat build-up
6 point suspension system for a secure, comfortable fit
Triple reinforced crown for superior impact protection
Suspension can be rotated 180 degrees for reverse wear
To Remove & Rotate your Suspension
To Remove:
1.
Firmly grasp the black strap
between your thumb and closed pointer finger
2.
Using your thumb as leverage on
the hard hat’s bottom edge, apply pressure upwards while keeping the black
strap as close to the hard hat’s top shell as possible.
3.
When enough pressure is applied
the metal clip will make a ‘pop’ indicating it is clear of the rivet.
4.
Remove the full clip and continue
on until all six clip points are disconnected.
To Re-attach:
1.
Slip the metal clip’s two prongs
(facing towards the top of the hard hat) over the rivet.
2.
Grip the black strap between thumb
and forefinger and apply pressure towards the hard hat’s top.
3.
The metal clip will make a ‘pop’
indicating it’s locked into position.
4.
Install the remaining clips in the
same fashion in a clockwise motion.
