Laboratory 600W Constant Temperature Humidity Incubator 80L 220V 5-65℃ Tem.range

Constant temperature and humidity incubator can control high and low temperature and humidity, which is used to simulate environmental temperature and humidity. It is widely used in textile, food processing, biological culture, physical analysis, and other tests and various temperature and humidity tests of industrial products.

Steam humidification, humidity control humidity stability, humidity fluctuation range: ± 3% RH, with automatic water replenishment, water shortage power-off function, to prevent the machine from burning due to lack of water.

LCD microcomputer system with timing, alarm, and over - temp protection. 30 temp/humidity presets for auto - switching environmental simulation

The inner liner is made of high-quality stainless steel plate,which is turdy,durable,corrosion-resistant and anti-aging,with a ring transition around the inner liner and a built-in toughened glass door. Equipped with stainless steel drainage tank with one-key drainage function, press the drainage key to drain the water after shutting down the machine.

Note: The above temperature and humidity parameters can be measured at no load temperature of 28℃

and humidity of 65%RH.

Model	HSP-80BEII
Volume	80L
Voltage	220V
Phase number	1
Tem.range	5-65℃
Tem.resolution	0.1℃
Humidity range	45-95%RH
Tem.fluctuation	±3%RH
Power	600W
Inner chamber size (DWH)mm	400400500

Features

1. The shell of the product is made of high-quality steel plate, the surface of which is firmly painted by electrostatic spraying, with beautiful appearance. The studio is made of high-quality stainless steel plate, which is anti-corrosion and anti-aging, with circular transition around the inner tank and toughened glass door built in.

2. Adopting the LCD control system of intelligent microcomputer, with functions such as timing, alarm and overtemperature protection;30 sections of temperature and humidity setting, automatic switching, realize the function of simulating environment temperature and humidity.

3. Brand compressor is fluorine-free and environmentally friendly, with breeze circulation to ensure uniform temperature inside the box.

4. Balanced control of cooling and heating ensures small temperature fluctuation and more accurate temperature control.

5. Intelligent frost system to ensure that the machine does not frost when running for a long time.

6. The front door has an independent glass door, which is transparent and beautiful, convenient for observing the changes of the items in the box.Magnetic tape seal, easy to open, good seal.

7. Adopt steam humidification, humidity control humidity stable, humidity fluctuation range: ±3%RH, with automatic water replenishment, water shortage and power off function, to prevent the machine from burning out due to water shortage.

8. With one-button drainage function, press the drainage button to discharge water after shutdown.

9. Equipped with compressor overheat protection, instrument failure protection and other safety measures to ensure the safety of the experiment.


The shell of the product is made of high-quality steel plate, the surface of which is firmly painted by electrostatic spraying, with beautiful appearance.	Adopts high quality mirror stainless steel inner liner, easy to clean, the spacing of the partition in the box can be adjusted.	6mm thick tempered glass viewing window to observe the internal situation at any time.

Adopting the LCD control system of intelligent microcomputer, with functions such as timing, alarm and overtemperature protection.	A light is mounted on the top for a clearer view of the interior.	Stainless steel drainage sink.

https://topseller365.com/data/prd/148/093/36.jpg

Items Included(148093)

Laboratory 600W Constant Temperature Humidity Incubator 80L 220V 5-65℃ Tem.range

On May 6, 2025 at 01:07:28 PDT, seller added the following information: