Features
| Module configuration | 2 Contour or 4 Mesa modules |
| Channel processing | 6 in Contour mode, 4 in Mesa mode |
| Input routers | 8 input routers with 4 priorities in each, seamless failover to lower priorities |
| Module input mixer | 4 ch. for Contour, 8 ch. for Mesa-modules. Mix any ratio between all input routers. |
| Input processing | Parameteric EQ with Mesa and Ideal Graphic equalizers, both utilizing Raised Cosine algorithms |
| Output processing | Linear phase or Classic crossovers, Parametric EQ, shelving and all-pass filters |
| Features | Delay, Mute, Phase, Gain etc. |
| Limiters | LimiterMax with Peak and RMS limiter. Confi gurable MaxRMSLevel, MaxRMSCorner, MaxRMSAttack, MaxRMSRelease and MaxPeakLevel |
| SuperModule compatible | Yes |
Audio Performance
| Conversion resolution | 24-bit |
| Internal Sample Rate / Data path | 96 kHz / 32 bit floating point |
| Product propagation delay | Best case (AES synchronous 96 kHz to AES synchronous 96 kHz via module) 0.871 ms Analog (Analog in to Analog out via module) 1.049 ms Pass thru (Analog in to AES synchronous 96 kHz bypassing module) 0.158 ms |
| Maximum available user delay | 2 seconds |
Analog
| Inputs and Outputs | 4 inputs, 4 outputs |
| Frequency response, analog-to-digital | +/-0.1 dB, 20 Hz to 20 kHz |
| Frequency response, digital-to-analog | +/-0.03 dB, 20 Hz to 20 kHz |
| THD+Noise, inputs | 0.00024% typical at 1 kHz |
| THD+Noise, Outputs | 0.00037% typical at 1 kHz |
| Dynamic range, inputs | 116 dB |
| Dynamic range, Outputs | 115 dB |
| Input impedance | 20 kOhm balanced, 10 kOhm unbalanced |
| Output impedance | 50 ohms |
| Maximum input level | +26 dBu |
| Input sensitivity - settings for digital full-scale | +12 dBu, +26 dBu |
| Maximum output level | 21 dBu |
| Crosstalk, inputs | -98 dB, 20 Hz to 20 kHz |
| Crosstalk, outputs | -98 dB, 20 Hz to 20 kHz |
| Common mode rejection ratio (CMRR) | >70 dB, 20 Hz to 20 kHz |
Dante Audio Network
| Inputs and Outputs | 4 inputs, 8 outputs |
| Supported sample rates | 48, 96 kHz |
| Support redundant paths | Glitch-free Dual Redundant Dante using two Ethernet networks |
| Receiver latency | 0.5 ms, 0.8 ms, 1.3 ms, 4 ms |
Device presets
| Frame presets | 100 |
AES3/EBU (sample rate converters available as desired)
| Inputs and Outputs | 8 inputs, 8 outputs |
| Supported sample rates | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz (I/O individually selectable) |
| Supported resolutions | Up to 24-bit |
| THD + Noise | 0.00002 % at 96 kHz and 0.00006 % at 44.1 kHz sample rate |
| Dynamic range | Base48 -140 dBFS, Base44 -125 dBFS |
Clocking
| Clock selection | Manual or automatic according to priority scheme |
| Oscillator type / synchronization |