'L' Shape Windshield Removal Blades 3 Size Kit - Rockwell Sonicrafter Multi-Tool

Kit Includes:

	1 Piece: 3/4' Quick Release 'L' Shape Windshield Removal Knife (Q7206-2cm)  Best for cutting: This 'L' shaped blade has a 3/4" long bent leg that tapers to a point. This will be the first blade selected to start most plunge cuts into the windshield sealants. Having a sharpened knife edge front and back, this blade also utilizes a serrated knife edge on one side.
	1 Piece: 1'' Quick Release 'L' Shape Windshield Removal Knife (Q7206-3cm) Best for cutting: This 'L' shaped blade has a 1" long bent leg that tapers to a point. For more experienced users this blade can be a starter cutter and is also long enough to cut through most windshield sealant zones. Having a sharpened knife edge front and back, this blade also utilizes a serrated knife edge on one side.
	1 Piece: 1-1/2" Quick Release 'L' Shape Windshield Removal Knife (Q7206-4cm) Best for cutting: This 'L' shaped blade has a 1-1/2" long bent leg that tapers to a point. This will be your finish through chasing blade for situations where extra cutting length is needed to get through deeper windshield sealant zones. Having a sharpened knife edge front and back, this blade also utilizes a serrated knife edge on one side.

Alert: The 1-½ inch 'L' blades are designed to extend the cutting depth when needed after first cutting with our shorter ¾ inch or 1 inch 'L' blades.  In other words, don't start a windshield removal job with a 1-½ inch long 'L' blade.  Make your initial windshield sealant cuts first with the shorter 'L' blades and then step up to the longer 1-½ inch blade if needed to chase through and deepen your original sealant cuts.

Having a sharpened knife edge front and back, this blade also utilizes a serrated knife edge on one side to assist with thicker sealant zone cutting.

Sharpen your knife edges regularly using our 3 Piece Sharpening Stone Set. Search for eBay listing number: 265157784908.

Best suited for slicing urethane sealants around the windshield glass edges, accessible by this blade's profile.

ATTENTION: Extend the cutting effectiveness of your 'L' blade by keeping the knife edges sharp and spraying soapy water into the cut zones. Set your machine speed to high and guide the knife end slowly along the inside glass surface.  This allows the blade to get a scissor cutting action going against the glass.

Special Alert for Bosch MX30E / MXH180B & Dremel MM35,MM40, MM45, MM50 model owners: Please be aware that this item and any of our other 'Quick Release'  anchor accessories, will NOT suitably lock fit onto your Bosch or Dremel Tool-less blade change multi-tools without our C-Clip Adapter, (see eBay listing).