KT-2T Welding Tank Turning Rolls Digital Display Welding Turning Roller Frame

Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide
$3099.48
Brand
Banfluxion
MPN
022847
Item Type
Welding Turning Roller
condition
New

2T 110V Digital Display Welding Turning Roller

with Sliding Rail and Press Wheel Frame
Product Overview
The Welding Turning Roller Rack is a professional mechanical device for assisting in welding cylindrical or annular workpieces, and can be matched with welding operation machines, submerged arc welding machines, etc. The machine is mainly applied to welding of pipelines include the inside and outside of pipes, can drive the workpieces to rotate at the uniform speed and can improve the welding efficiency and quality. It is equipped with a sliding rail system and a press wheel frame, thereby meeting different processing requirements of customers.
Attention
Before operating the unit, please read this instruction book thoroughly, and retain it for future reference.
1. The machine should be placed at a dry, clean, ventilated and horizontal position, and the operation of the machine should be horizontal and smooth. Keep away from flammables and explosives.

2. For safety reasons, the device must be connected to a reliable safety grounding device and must have three feet with ground connection.

3. Unplug the power cable/cord if the machine will not be used in a long time.
Product Parameters
Model KT-2T
Input Voltage AC110V, 50/60Hz
Power 200W
Load Capacity 2T
Linear Speed of Rollers 100-1000mm/min
Applicable Workpiece Diameter Ф50-1000mm
Roller Specification 70mm(W)×Ф250mm
Slide length 120cm/47.24in
Speed Regulating Manner Stepless Speed Regulation (Externally Connected with the Foot Pedal)
Product Features
　

Auto-Foot Alternation Switch:
Automatic mode means that rollers continuously rotate. The rollers rotate when the foot pedal is pressed, and the rollers stop when the foot pedal is released.


 Corotation-Reversion Switch:
The rollers rotate forwards when the switch points to the corotation position, the rollers stop rotating when the switch is located in the middle, and the rollers rotate reversely when the switch points to the reversion position.


Speed Regulating Knob:
The roller speed can be regulated by the speed regulating knob.


　

Press Wheel Frame


Two small rubber wheels are arranged to press the workpiece to be welded and can ascend and descend by rotating the handwheel on the top, the whole press wheel frame can be moved and fixed as needed, thereby well adapting to the different heights of workpieces, preventing the workpieces from jumping and better ensuring the operating stability.

 　

Sliding Rail System


The slide length is 120cm. Due to the design of the sliding rail, the driven roller frame can slide along the sliding rail freely and easily and can be fixed to the required position by a black screw, different processing requirements of workpieces with different sizes can be met perfectly, the problem of manual moving roller racks is solved, and the practicability is greatly improved.

 　

Digital Display Control Box


Multiple switches are integrated on the control box and facilitate integrated control over the operation. The speed is digitally displayed and set on the control box, the user can observe the running speed more directly and visibly, the operation difficulty of workers is reduced, and the processing effect can be well guaranteed.
　

Motor & Speed Reducer


The motor power is 200W. The motor drives rollers to rotate through the transmission mechanism so that the workpiece can stably rotate on the rollers, and continuous adjustment of the welding position can be achieved. The rotating speed can also be controlled by the speed reducer to meet the welding requirements of the workpieces with different diameters and materials. Operation is stable, and the noise is low.

 　

Polyurethane Wheels


The load capacity is 2T. The roller wheels are made of polyurethane materials, the friction between the roller wheels and the workpiece can be increased, the roller wheels are resistant to temperature and wear and free of slippage, stable rotation of the workpieces can be effectively ensured, and the welding effect is better achieved. The wheels can be mounted in different holes according to the diameters of workpieces, so that the practicability is higher.

 　

Foot Pedal & Automatic Mode


The button for switching the foot pedal mode and the automatic mode is arranged on the control box, the foot pedal can be controlled by the button, the operator can freely select the control modes to meet different demands, rotation of the workpieces can be flexibly controlled in the operating process, and the convenience and safety of welding operation are improved.
Maintenance
Users are responsible for the proper operation and maintenance of the equipment they use. Some equipment will quickly become damaged and unsafe if abused or subjected to improper demands. If the equipment is regularly maintained and not abused, you will get the maximum safety and service performance from your equipment.
  • Do not overload equipment.
  • Do not use overcharged voltage.
  • Do not use hands to stop the roller when the machine is working.
Application
The Welding Turning Roller Rack can assist the workers in pipeline welding and other operation, and can be well applied to the fields of engineering machinery, pressure vessel manufacturing, ocean engineering, automatic production, etc. It is suitable for plasma cutting, flame cutting, flange welding, surface polishing, surface spraying and other production processes and is an ideal device for industrial production.
Product Display
Item Number (022847): 1 x Digital Display Welding Turning Roller 2T 110V

Shipping & Handling


▲ Default shipping cost or free shipping service is only for the lower 48 United States by UPS Ground or USPS. Other areas or needs other shipping ways, please contact us.

 

▲ 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.

 

Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.

Sales tax / Customs duties: Collected by ebay.

 

Return / Refund

Returns & Exchanges

▲ All returns should be made within 30 days of delivery date. Items must be in unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.


▲ Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15-30% restocking fee of the items purchase price will be charged. 

 

Defective & Damaged Products 

▲ If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.

 

 

On May 15, 2025 at 00:50:26 PDT, seller added the following information:

DataCaciques