Kmac Polycarbonate Lexan Clear Tube / Tubing - 5.00" OD x 4.50" ID - Pick Length

Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide
$174.0
Length in Feet
2 Foot
Brand
Basic
Country/Region of Manufacture
United States
condition
New
Polycarbonate Lexan Clear Tube / Tubing 5.00" x 4.50" (5.0 x 4 1/2") -8059Z

5.00 Inch Outside Diameter

4.50 Inch Inside Diameter

.250 Inch Wall Thickness

It can be machined, drilled, cut and sawed, and is easily joined with solvents and adhesives. Weather Resistant, UL 94HB and FDA Compliant. Made from LG Chemical Lupoy 1201 Polycarbonate Resin.

Polycarbonate Tubes are not Pressure or Vacuum Rated

Tolerances: Tubes

OD Dia +/-.045", ID Tol ±.035"

These Polycarbonate tubes are extruded, therefore, they will have extrusion lines, from the extrusion process.
Extrusion lines appear as fine scratching. They are not as clear as glass or cast acrylic. They also have a blue edge tint.

All lengths other than 96" are cut on a band saw, and the blade tapers as it cuts, therefore flat or square cuts are not guaranteed.

265° F continuous use temperature. Polycarbonate has a glass transition temperature of about 147 °C (297 °F; 420 K), so it softens gradually above this point and flows above about 155 °C (311 °F; 428 K)
Cut to Length Tolerances +/- 1/4"

Tubes less than full length (8 Ft) are cut on a band saw, and may have slight burrs, shavings, etc. Larger Diameters may not be perfectly flat or straight or perpindicular to the length due to blade taper/wandering.

’