Brand new aftermarket Stator + Improved Flywheel

Direct replacement to your original unit

Plug-and-play, direct fit, easy installation

Pick up pulsar coil included

All products shipped are tested

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Brand new aftermarket Stator + Flywheel

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Pick up pulsar coil included
• Connector included
• Rubber grommet included
• All products shipped are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Suzuki V-Strom 1000 -- 2002-2009, 2012

108092-R00

Stator

Dimensions :
Interior diameter : 54 mm
Exterior diameter : 119 mm
Thickness : 25 mm
Length of wires stator to grommet: 160 mm
Length of wires grommet to plug: 430 mm
Length of pickup coil's wire to grommet: 150 mm

Other specifications:
Number of wires: 5
Number of plugs: 2
Number of pins: 5
Number of poles: 18
Wire to wire resistance:
Alternator: Black to Black = 0.6 ohms +-20%
Pickup: Blue to Green = 193 ohms +-20%

Flywheel

Dimensions:
Inner Diameter: 120 mm
Outer Diameter: 149 mm
Total Height: 65 mm
Inside Height: 46 mm
Center Housing Depth: 35 mm
Center Housing Widest: 35 mm
Center Housing Thickness: 26 mm

Before installing your new stator and flywheel

• Check the AC output of the stator
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.

If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.