Kit HO Stator 300 W + Gasket For Yamaha YFM 660 R Raptor 2001 2002 YFM660R 660R

$139.99
Brand
RMSTATOR
Manufacturer Part Number
RM01013G--A--Y
OE/OEM Part Number
RM01013G-R00
Manufacturer Warranty
2
Replaces OEM Part#
RM01013G-R00
condition
New
Kit High Output Stator 300 W + Crankcase Cover Gasket for Yamaha YFM 660 R Raptor 2001-2005
 
KEY FEATURES
 

Brand new kit high output stator + crankcase cover gasket

The quality exceeds OEM equipment

Direct replacement to your original unit

Plug-and-play, direct fit, easy installation

All products shipped are tested

DESCRIPTION

 

Brand New Kit High Output Stator 300 W + Crankcase Cover Gasket

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • All shipped products are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

High Output Stator 300W:
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

Vehicle models fitment

 

Yamaha YFM 660 R Raptor -- 2001-2005

OEM part replacement

 

RM01013G-R00

Specifications

 

Dimensions Stator:
Interior diameter : 34 mm
Exterior diameter : 94 mm
Thickness : 13 mm
Length of wires stator to grommet : 180 mm
Length of wires grommet to plug : 220 mm
Length of pickup coil's wire to grommet : 100 mm

Other specifications :
Number of wires : 7
Number of plugs : 2
Number of pins : 7

Wire to wire resistance :
Alternator : White between each White = 0.4 ohms +/-20%
Pickup : Blue to Green = 450 ohms +/-20%
Source : Black to Red = 0.1 ohms +/-20%

instructions

 

Before installing your new stator:

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code then you?re original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010''.

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Item Delivery

 

Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.

If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.