KISS Rock and Roll Over v2 light box
Custom designed, 3D printed and fully assembled.
The box is approximately 9-3/8" in diameter and 1-3/8” thick. Box made from plastic. The outer box is black textured plastic. The box face is colored plastic. This v2 version has 8 colors in the plastic, verses 4 colors in the original version.The back is removable, if by chance the lights ever need to be replaced.
plastic colors:
1 - Fluorescent Yellow
2 - Fluorescent Green
3 - Fluorescent Orange
4 - Red
5 - White
6 - Purple
7 - Baby Blue
8 - Black
There are
approximately 60 LEDs wrapped around the inside of the box. They are
controlled with a remote. Lights are powered with a USB. A wall adapted
is needed (Not included). Lights can also be powered by any powered USB
port. For example, laptop, stereo, external battery, etc. The lights can
stay on a solid color or you can choose from 4 different blinking
sequences. Blinking speed can be adjusted to faster or slower. Lights
can as also be adjusted using same buttons to dim or brighten.
The USB power cord is 16" long.
Back of light box has a slotted hole for hanging on the wall if desired.
Comes with optional stand.
The
lights look the best in a dark room. Although, with the colored image
on the front, they look just as good either way. Sometimes during the
print, occasional color smears become embedded within the layers. Yours
may have a small imperfection because of this.
***** NOTE FOR OVERSEES BUYERS ***** THE LED LIGHTS REQUIRE 110 VOLTS. MAKE SURE YOUR WALL ADAPTER USED FOR 110 VOLTS INPUT AND 5 VOLTS USB OUTPUT TO LIGHTS.
THE BOX DOES NOT PLAY MUSIC.