No More Mic Cables：This 2.4G XLR microphone wireless system brings freedom to your favorite XLR dynamic mic. Movement is unrestricted, with no cables to trip over and get in the way. The quick and simple setting makes it easy for everyone to enjoy wireless microphone sound.
Long Battery Life：This wireless microphone transmitter and receiver support 12 hours of runtime after fully charging. The runtime is sufficient for common meetings, weddings, DJ work, news interviews, photography and recording, and band performances.
150ft Range of Connection：Long transmission distance helps cater to your need for remote "set up". The XLR microphone wireless system can gives you more room to perform, no longer limited by the location of the speakers.
Wide Application：Just plug and play, no need to do much setting. Compatible with many XLR devices such as dynamic, condenser microphone, wireless microphones system, Audio mixer, PA system.
??? ??????? ?????：Turn off the 48V switch, this xlr audio transmitter and receiver can be used to connect dynamic microphones. Turn on the 48V switch, it can be used to connect a condenser mic. The actual usage time differs due to the power consumption of the microphones of each brand. It is recommended that you test the actual available time before the official performance to avoid affecting your normal work
??? ??????????? ??? ??? ????????：Works with any dynamic, harmonic or condenser microphone or wireless microphones system, audio mixer, and PA system to provide stable and reliable wireless transmission.
TIPS - In order to charge the transmitter and receiver properly, please use a 4.5V~5.5V charger. Otherwise, the battery may not be charged or damaged.
What you need to know:
1. This product supports one-to-one and one-to-many.
2. Please make sure the transmitter and the receiver keep a distance away from wireless router or other wireless devices during use.
3. Obstructions between the transmitter and the receiver may affect the transmission distance.
4. A maximum of 4 sets of transmitters and receivers can be used in the same place simultaneously.
5. If only one segment of green LED is flashing, indicating the unit is in low battery, pls charge it in time.
6. Due to the characteristics of lithium batteries, there may be a slight discharge phenomenon. If not used for a long time, please charge within two months to prevent the battery from entering a low battery protection state.
MW-2 Receiver
Power Source Lithium battery
Reception sensitivity -85dBm
Cell capacity: 3.7V/450mAh
Received frequency 2.4GHz frequency
Signal Distortion <0.02%
SNR 105 dB
Gain 10db
Frequency response 20Hz - 20kHz
Delay time <16ms
Sampling rate 24-bit / 48KHz
Output impedance 680 Ω
Port's type XLR male port
MW-2 Transmitter
Power Source Lithium battery
Cell capacity: 3.7V/700mAh
Transmission power 10 dBm
Working frequency 2.4GHz frequency
Frequency response 20Hz - 20KHz
Delay time <16ms
Sampling rate 24-bit / 48kHz
Input impedance 3.3K
Port's type XLR female port
MW-2 cannot perfectly adapt to all brands and models of 24V and below phantom power capacitor microphones. Due to different electromagnetic environments or electromagnetic shielding standards of different brands of capacitor microphones, some brands or models of microphones may produce different levels of noise when adapted. We suggest that you return or replace the microphone to adapt to different usage.
Package Included:
1 * Wireless microphone system MW-2 Receiver
1 * Wireless microphone system MW-2 Transmitter
1 * Rechargeable Power Cable
